[App_rpt-users] How to tell when a node is keyed?

[Corey Dean]

I looked for this quite a while back and couldn't figure it out either.  It would be nice to be able to define courtesy tones for different nodes that were connected even if they weren't directly connected!

Corey N3FE

> On May 1, 2015, at 10:16 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
> I've been looking at how to use the event subsystem to change courtesy tones
> based on what node is keyed.
> 
> RPT_ALINKS would work but it only shows what nodes directly adjacent are
> keyed.  RPT_LINKS shows what nodes are linked, but does not propagate status.
> 
> This presents a problem when we have a central node and everything linked up
> to to that (it masks the actual node keyed).
> 
> Any idea if this is even possible to get this information as a variable.
> 
> If anyone had CT's changing based on an event or variable, can you share your
> config?
> 
> 
> 73's
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.