[App_rpt-users] rpt.conf include not working ?

[mike at midnighteng.com]

Barry,

That line at the end of the file should only be read if it exists.
It is a way to include additional set-up if you want to separate set-up
files instead of all in one file.
You could reasonably have only those include lines in the file and
describe each node in a include file (for example).

However, it should read:
#includeifexists custom/n29285.conf (example)


If the file exists, it will be read into the system config. If not, it is
ignored.

...mike/kb8jnm



> Hi Guys again
>
> in the rpt.conf file there is an include at the end of file.
>
> #includeifexists custom/rpt.conf
>
> is that the correct syntax ?? should the # be there nor not ? as my
>
>   custom/rpt.conf  file containing as below now is NOT being Parsed or
> Read ?
> If I add all this extra stuff into the rpt.conf file directly it works but
> problem is all
> the main .conf file can be over written by the allstar control portal
> thus this is why you add extra stuff into files in custom/....
>
> any thoughts Thanks
>
> Barry G8SAU
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>