[App_rpt-users] Event Magagement SubSystem

[Bryan Fields]

On 5/26/15 8:05 PM, Corey Dean wrote:
> I recently installed a spectra tac voter on my vhf repeater.  Using the
> outputs in app_rpt I was able remotely disable each card if needed.  That got
> me to thinking.  There is an output for each card that will show if that card
> is voted.  Could the event manager be able to see this and execute a command
> for it such as do a playback of a sound file so that the users know which
> receiver they are hitting?  If so, would I be able to tell it to only do the
> playback (execute the command) only if there is no active signal?  Basically
> if a user voted a few times in the same transmission, I wouldn't want it
> playing courtesy tones during his transmission if it changed receivers unless
> the COR dropped.
> 
> Thoughts?  Suggestions?  Is this doable?

This is something I've wanted to do, but I've yet to figure out a way to
change the courtesy tones as they not not really a variable you can set and
unset.  I could very well be wrong about this, as it's been some time since
I've looked at it.

Anyone have ideas how to set CT's from the event subsystem?

-- 
Bryan Fields

727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net