[App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install

[Geoffrey Mendelson]

I use several WiFi routers in client mode (not all support it) for CISCO
VoIP phones and Ethernet printers.

On Tue, May 26, 2015, 19:59 kk6ecm <kk6ecm at gmail.com> wrote:

> I believe this inexpensive device in client mode will do what you want. It
> connects to your computer, then provides a wifi link to the ssid/password
> you pre select.
>
>
> http://www.amazon.com/TP-LINK-TL-WR702N-Wireless-Repeater-150Mbps/dp/B007PTCFFW/ref=sr_1_1?s=electronics&ie=UTF8&qid=1432658798&sr=1-1&keywords=wr702n
>
> http://www.tp-link.us/products/details/?categoryid=3143&model=TL-WR702N
>
> Thanks,
> Bob
> kk6ecm
>
> Sent from iPad
>
>
> On May 25, 2015, at 8:09 PM, Neil k8it <k8it at cac.net> wrote:
>
>
>
>  *From:* Neil k8it <k8it at cac.net>
> *Sent:* Monday, May 25, 2015 11:06 PM
> *To:* Justin Harris <justin at suid.net>
> *Cc:* app_rpt-users at ohnosec.org
> *Subject:* Re: [App_rpt-users] how to configure Centos ACID for wifi not
> hardwireafter install
>
> yes you are correct
> dev is wlan0
> kernel is 2.6.18-404.e15PAE on an i686
>
>  *From:* Justin Harris <justin at suid.net>
> *Sent:* Monday, May 25, 2015 10:48 PM
> *To:* Neil k8it <k8it at cac.net>
> *Cc:* <app_rpt-users at ohnosec.org> <app_rpt-users at ohnosec.org%3E>
> *Subject:* Re: [App_rpt-users] how to configure Centos ACID for wifi not
> hardwireafter install
>
> Usually the interface name for wireless devices is wlan0, wlan1, etc. It
> isn't so much about the version of Linux as it is the Kernel version you
> are running and if it has native support for your hardware. As far as
> getting wireless working once you have the appropriate driver is called a
> "wireless connection manager". One that comes to mind is called wicd. Hope
> this helps a bit.
>
> Take care,
> Justin Harris
> KG7FKJ
>
> On May 25, 2015, at 7:28 PM, Neil k8it <k8it at cac.net> wrote:
>
>  Well I figure if I report what I have learned someone may know an answer
>
> Centos v5.11
> WIFI Intel NIC 52657LM
> here is a link to configuring it in Centos v5.11
> http://linuxcommando.blogspot.com/2013/10/how-to-connect-to-wpawpa2-wifi-network.html
> dev lan0 is currently not "UP"
> trying to follow the instructions to bring it "UP" results in a Firmware
> request failure which most likely means
> the driver is not present and needs to be loaded.
> so I'm searching for a linux driver for this intel 52657LM NIC
> anybody have one that will run under centos v5.11
>
> thanks Neil k8it allstar node 41838 or echolink k8it-L
>
>
>
>  *From:* Neil k8it <k8it at cac.net>
> *Sent:* Monday, May 25, 2015 3:41 PM
> *To:* app_rpt-users at ohnosec.org
> *Subject:* [App_rpt-users] how to configure Centos ACID for wifi not
> hardwireafter install
>
> I got ACID installed using a hardwire internet connection.
> Now I need to eliminate the hardwire connection and use the internal
> wireless NIC card in the pc box. I need to have the ssid and network
> password and gateway adddresses setup so when acid boots asterisk the
> network is logged into. how do I do this with acid / centos?
> thanks
> 73 Neil K8IT
> Allstar node 41838 or Echolink k8it-L
>
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> ------------------------------
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
>
>  _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150527/0bd4aea5/attachment.html>