[App_rpt-users] DIAL Distribution Question

[Steve Zingman]

Steve,
I have not tried RAID with DIAL.
Based on RAID controllers, I assume you are running hardware RAID.
Which controller?

I will not have time to test this until next week.

73, Steve N4IRS

On 10/09/2015 09:29 AM, Steve Mahler wrote:
> I have a new AllStar node in development.  I grabbed the DIAL ISO and 
> attempted to overwrite my fairly virgin ACID distribution. After 
> complaints about buffering the install hardware search functions 
> started.  The network started (IPV6 and IPV4).  The disk partitioner 
> started but them complained that there was "No Root File System".
>
> This is a Dell 960 with dual 250 GB drives.  But, they are configured 
> in the disk controller as a RAID 1 appearance (I did my ACID install 
> as RAID 1).  Does the DIAL distribution allow for RAID Controllers?
>
> ...STeve - KF5VH
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic