[App_rpt-users] Switching from carrier access to CTCSS access - Asterisk DIAL using URI interface

[Dave Newmyer]

Thanks for replying!  Yes, jumper P551 is set to flat audio.  I am 
working OK using carrier access, just not able to implement CTCSS access.

On 10/26/2015 10:29 PM, Steve Agee wrote:
> Did you change or check jumper P551 on the logic board of the radio to 
> ensure you are sending DISCRIMINATOR audio to the U.R.I. ?  If the 
> jumper is in the other position (speaker audio) then it won't work.
>
> N5ZUA
>
> On 10/26/2015 6:52 PM, Dave Newmyer wrote:
>> Hello,
>>
>> I recently updated from Asterisk ACID to Asterisk DIAL due to 
>> hardware (CPU) problems.  The install went well, and I am now able to 
>> use the Lenovo CPU that I had trouble with  (Sept 7, 2015).
>>
>> I was recently informed that it would be preferable if I were to use 
>> CTCSS access on my node instead of  carrier access, and I have been 
>> attempting to do so, first by activating ctcss via dsp in the 
>> usbradio.conf file, then by reprogramming my Mot M120 radio for a 
>> channel with carrier access, or the alternate channel with ctcss 
>> access and adding a line from pin 8 of the radio accessory connector 
>> to pin 7 of the URI.
>>
>> In Radio-Tune-Menu, choice 4  Auto-Detect Rx CTCSS Level Value 
>> passes, but if I try performing a DTMF command like *81, I get no 
>> reply from the node.
>>
>> Any ideas as to what I should try next?
>>
>> Thanks,
>>
>> Dave N
>> N0KM
>>
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus