[App_rpt-users] Interfacing URI to TS480

[Marshall Oldham]

You should be able to interface the URI to the TS480 through the packet connector.
All the signals needed for the URI are there on the packet connector.
I have built a few of these cables for customers using the packet port.
As far as controlling the radio remotely that would require some type of interface from the
node computer to the radio. 

Marshall - ke6pcv 

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
kk6ecm
Sent: Wednesday, September 30, 2015 2:19 PM
To: Bryan D. Boyle
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Interfacing URI to TS480

Don't know if it's possible, but wondering the same thing myself. As for COR, you can generate
a pseudo COR by detecting the presence of audio. I have a repeater radio I'm working on for the
club that was previously modified using a double transistor pair that sets the output to the
voltage rail upon detecting audio... Sort of latches up., and drops when audio drops.... With
HF, ere can be a lot of noise, so the level needs to be adjusted, kind of like a squelch.

Thanks,
Bob
kk6ecm

Sent from iPad


> On Sep 30, 2015, at 1:50 PM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
> 
> Has anyone attempted to do this?  I'm thinking that there is a net I'd like to join on Weds.
nights and sometimes I'm away from my house...so, it's not possible (but don't want to miss
it...).
> 
> I know, what we're talking about is a remote base, in essence; however, since the
characteristics of the reception of HF (where there is no concept of a COR for a useable
signal) are a bit different than what is considered normal operations.
> 
> Has anyone attempted this?  Am I nutz?  Is it even doable with the TS480, a URI, and a node
assignment?
> 
> Feel free to take offline with me if it isn't something that should clutter up the app_rpt
list.  Thanks
> 
> Bryan WB0YLE
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have
trouble unsubscribing, please send a message to the list detailing the problem. 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have
trouble unsubscribing, please send a message to the list detailing the problem.