[App_rpt-users] Interfacing URI to TS480

[mike at midnighteng.com]

Bryan,

First, No, I have not done that with a ts-480.
It's do-able

You only need to use 'vox' for COR
Not having looked at kenwoods newest command sets, I'm not sure that you
can tune it (freq agile).
But Kenwood has always been straight forward with settings in the past so
if you know how to script opening of a com port, it normally is ASCII data
type so it's should be fairly easy to make what you want in agile control.


...mike/kb8jnm

> Has anyone attempted to do this?  I'm thinking that there is a net I'd
> like to join on Weds. nights and sometimes I'm away from my house...so,
> it's not possible (but don't want to miss it...).
>
> I know, what we're talking about is a remote base, in essence; however,
> since the characteristics of the reception of HF (where there is no
> concept of a COR for a useable signal) are a bit different than what is
> considered normal operations.
>
> Has anyone attempted this?  Am I nutz?  Is it even doable with the
> TS480, a URI, and a node assignment?
>
> Feel free to take offline with me if it isn't something that should
> clutter up the app_rpt list.  Thanks
>
> Bryan WB0YLE
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>