[App_rpt-users] Disabling ID functions

[Andrew Sylthe]

Stephen,

Commenting out the "idrecording=" line should stop the ID.  I have one of
my nodes setup that way (with a separate controller) and it works for me.

Thanks!

On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:

> Thanks Steve, this is what I have set:
>
> duplex = 0                              ; 0 = Half duplex with no
> telemetry tones or hang time.
> linktolink = yes                        ;     Special Case: Full duplex if
> linktolink is set to yes.
>                                         ;     This mode is preferred when
> interfacing with an external multiport repeater controller.
>
> Should I still be getting ID's in this case?
>
> On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman at msgstor.com>
> wrote:
>
>> Stephen,
>> Take a look at the duplex setting at the top of rpt.conf
>>
>> more if you need it...
>> 73, Steve N4IRS
>>
>>
>>
>> On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
>>
>> This is not glaringly obvious to me... so I'm wondering if it's possible
>> or supported. I have my URI tied into a port of my repeater controller
>> specifically for Allstar access and a few other things, and my ID
>> requirement is being handled by the controller itself.
>>
>> How do I disable the ID coming from app_rpt? I saw these options in the
>> rpt.conf file, but I wasn't sure if commenting them out or setting the time
>> to "0" would effectively disable it?
>>
>> idrecording = |iK1LNX                   ; id recording or morse string
>> see http://ohnosec.org/drupal/node/87
>> idtalkover = |iK1LNX                    ; Talkover ID (optional) default
>> is none see http://ohnosec.org/drupal/node/129
>> idtime = 540000                         ; id interval time (in ms)
>> (optional) Default 5 minutes (300000 ms)
>> politeid = 30000                        ; time in milliseconds before ID
>> timer expires to try and ID in the tail. (optional, default 30000)
>>
>> tnx
>> Stephen
>> K1LNX
>>
>>
>> _______________________________________________
>> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160406/b296c7c6/attachment.html>