[App_rpt-users] Disabling ID functions

[Steve Zingman]

Andrew is correct. I THOUGHT duplex = 0 suppressed telemetry and IDs. It 
does not suppress IDs. commenting out idrecording and idtalkover (for 
good measure) seems to work.
Back to editing comments in sample configs!

Steve

On 4/6/2016 2:57 PM, Andrew Sylthe wrote:
> Stephen,
>
> Commenting out the "idrecording=" line should stop the ID. I have one 
> of my nodes setup that way (with a separate controller) and it works 
> for me.
>
> Thanks!
>
> On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx at k1lnx.net 
> <mailto:k1lnx at k1lnx.net>> wrote:
>
>     Thanks Steve, this is what I have set:
>
>     duplex = 0                              ; 0 = Half duplex with no
>     telemetry tones or hang time.
>     linktolink = yes                        ; Special Case: Full
>     duplex if linktolink is set to yes.
>                                             ;     This mode is
>     preferred when interfacing with an external multiport repeater
>     controller.
>
>     Should I still be getting ID's in this case?
>
>     On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman
>     <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>
>         Stephen,
>         Take a look at the duplex setting at the top of rpt.conf
>
>         more if you need it...
>         73, Steve N4IRS
>
>
>
>         On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
>>         This is not glaringly obvious to me... so I'm wondering if
>>         it's possible or supported. I have my URI tied into a port of
>>         my repeater controller specifically for Allstar access and a
>>         few other things, and my ID requirement is being handled by
>>         the controller itself.
>>
>>         How do I disable the ID coming from app_rpt? I saw these
>>         options in the rpt.conf file, but I wasn't sure if commenting
>>         them out or setting the time to "0" would effectively disable
>>         it?
>>
>>         idrecording = |iK1LNX       ; id recording or morse string
>>         see http://ohnosec.org/drupal/node/87
>>         idtalkover = |iK1LNX        ; Talkover ID (optional) default
>>         is none see http://ohnosec.org/drupal/node/129
>>         idtime = 540000       ; id interval time (in ms) (optional)
>>         Default 5 minutes (300000 ms)
>>         politeid = 30000        ; time in milliseconds before ID
>>         timer expires to try and ID in the tail. (optional, default
>>         30000)
>>
>>         tnx
>>         Stephen
>>         K1LNX
>>
>>
>>         _______________________________________________
>>         App_rpt-users mailing list
>>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>         To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>         You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>         -- 
>         "Anything is possible if you don't know what you are talking about."
>         1st Law of Logic
>
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>     scroll down to the bottom of the page. Enter your email address
>     and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem.
>
>
>
>
> -- 
> Andrew Sylthe
> KC9ONA

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160406/c594fe26/attachment.html>