[App_rpt-users] Disabling ID functions

[Stephen - K1LNX]

You guys rock... that seems to have did it :) I was treading in that
direction, but wasn't sure if that was the way to do it or not, so thanks
for clarifying!

73
Stephen
K1LNX


On Wed, Apr 6, 2016 at 3:07 PM, Steve Zingman <szingman at msgstor.com> wrote:

> Andrew is correct. I THOUGHT duplex = 0 suppressed telemetry and IDs. It
> does not suppress IDs. commenting out idrecording and idtalkover (for good
> measure) seems to work.
> Back to editing comments in sample configs!
>
> Steve
>
>
> On 4/6/2016 2:57 PM, Andrew Sylthe wrote:
>
> Stephen,
>
> Commenting out the "idrecording=" line should stop the ID.  I have one of
> my nodes setup that way (with a separate controller) and it works for me.
>
> Thanks!
>
> On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx at k1lnx.net> wrote:
>
>> Thanks Steve, this is what I have set:
>>
>> duplex = 0                              ; 0 = Half duplex with no
>> telemetry tones or hang time.
>> linktolink = yes                        ;     Special Case: Full duplex
>> if linktolink is set to yes.
>>                                         ;     This mode is preferred when
>> interfacing with an external multiport repeater controller.
>>
>> Should I still be getting ID's in this case?
>>
>> On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman < <szingman at msgstor.com>
>> szingman at msgstor.com> wrote:
>>
>>> Stephen,
>>> Take a look at the duplex setting at the top of rpt.conf
>>>
>>> more if you need it...
>>> 73, Steve N4IRS
>>>
>>>
>>>
>>> On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
>>>
>>> This is not glaringly obvious to me... so I'm wondering if it's possible
>>> or supported. I have my URI tied into a port of my repeater controller
>>> specifically for Allstar access and a few other things, and my ID
>>> requirement is being handled by the controller itself.
>>>
>>> How do I disable the ID coming from app_rpt? I saw these options in the
>>> rpt.conf file, but I wasn't sure if commenting them out or setting the time
>>> to "0" would effectively disable it?
>>>
>>> idrecording = |iK1LNX                   ; id recording or morse string
>>> see http://ohnosec.org/drupal/node/87
>>> idtalkover = |iK1LNX                    ; Talkover ID (optional) default
>>> is none see <http://ohnosec.org/drupal/node/129>
>>> http://ohnosec.org/drupal/node/129
>>> idtime = 540000                         ; id interval time (in ms)
>>> (optional) Default 5 minutes (300000 ms)
>>> politeid = 30000                        ; time in milliseconds before ID
>>> timer expires to try and ID in the tail. (optional, default 30000)
>>>
>>> tnx
>>> Stephen
>>> K1LNX
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Andrew Sylthe
> KC9ONA
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160406/034e4c67/attachment.html>