[App_rpt-users] URI loopback testing

[Steve Zingman]

Steve,
stop asterisk

cd /usr/src
svn co http://svn.ohnosec.org/svn/projects/allstar/uridiag/trunk uridiag
cd uridiag
make
chmod +x uridiag
./uridiag

I will add it to the next rev

73, Steve N4IRS


On 04/15/2016 07:12 AM, Stephen - K1LNX wrote:
> Hi guys... I've got a SimpleUSB full duplex system connected to a port 
> on my controller (Arcom RC210) and I've noticed something weird with 
> telemetry announcements, specifically connect/disconnect messages, and 
> I've tried with both a URI and URI-X with the same results.
>
> I suspect the audio may be clipping in the controller, even though the 
> levels appear to be adjusted correctly for 3Khz deviation @ 1Khz 
> modulation in and out, so I want to make sure the URI(s) are not the 
> problem.
>
> I see you can build a loopback connector 
> (docs.allstarlink.org/drupal/node/143 
> <http://docs.allstarlink.org/drupal/node/143>), but what's the best 
> way to test this? Is there a way to inject/monitor audio? I'd like to 
> see if I can reproduce the choppy audio so I can eliminate this being 
> something in my system and/or URI(s).
>
> tnx
> Stephen
> K1LNX
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160415/b75d2616/attachment.html>