[App_rpt-users] Connection outbound

[Bob Pyke]

seems to me you need to declare the bindport= <xxxx> so your external nodes list can be pushed to your server. e.g. ./var/lib/asterisk/rpt_extnodes


Thanks,
Bob
k6ecm
73

Sent from iPad


> On Aug 8, 2016, at 12:38 PM, Angelo <aglorioso62 at gmail.com> wrote:
> 
> Hello All,
> 
> 
> I have to manual configure the dial verison of asterisk due to network issues. The 4 nodes seems to be
> 
> showing up on the Allstar node list as green but we are unable connect to the other nodes inbound or
> 
> outbound. I realize inbound connect request port forwarding of 4569. As for outboud, it should connect
> 
> fine.
> 
> 
> I suspect it is something in the IAX.conf file that might be causing the issue.
> 
> Below is my IAX.CONF file :
> 
> 
> 
> ; Inter-Asterisk eXchange driver definition
> ;
> ;
> 
> [general]
> bindaddr=0.0.0.0
> disallow=all
> allow=gsm
> allow=g726aal2
> allow=ulaw
> jitterbuffer=yes
> forcejitterbuffer=yes
> dropcount=2
> maxjitterbuffer=4000
> maxjitterinterps=10
> resyncthreshold=1000
> maxexcessbuffer=80
> minexcessbuffer=10
> jittershrinkrate=1
> tos=0x1E
> autokill=yes
> delayreject=yes
> ;iaxthreadcount=30
> ;iaxmaxthreadcount=150
> 
> 
> register=42706:*******@register.allstarlink.org    ; password commented out wih *
> register=42707:*******@register.allstarlink.org
> register=42708:*******@register.allstarlink.org
> register=42709:*******@register.allstarlink.org
> 
> ; Incoming radio connections
> 
> [radio]
> type=user
> disallow=all
> allow=g726aal2
> allow=gsm
> codecpriority=host
> context=radio-secure
> transfer=no
> 
> [allstar-sys]
> type=user
> context=allstar-sys
> auth=rsa
> inkeys=allstar
> disallow=all
> allow=ulaw
> 
> [allstar-public]
> type=user
> context=allstar-public
> auth=md5
> secret=allstar
> disallow=all
> allow=ulaw
> allow=gsm
> 
> ; Yhe following should be un-commented to support Allstar Autopatch service
> ;[allstar-autopatch]
> ;type=peer
> ;host=register.allstarlink.org
> ;username=<One of the Node numbers on this server>
> ;secret=<The node password for the above node>
> ;auth=md5
> ;disallow=all
> ;allow=ulaw
> ;transfer=no
> 
> 
> 
> Any ideas???
> 
> 
> 
> Angelo
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.