[App_rpt-users] POCSAG Decoding

[Stacy]

Joe,

Take a look at the SDR programs like Gqrx and the like.

Here is a link that gives you an example of decoding POCASG using 
multimon-ng (you will have to scroll down to see the section on this):

http://gqrx.dk/doc/streaming-audio-over-udp


You should be able to also use a program like rtl_fm and pipe the output 
into multimon-ng to decode the data (skipping the need to use nc and gqrx).

(You will need one of those cheap under $20 DVB-T+DAB-FM usb decoders at 
the least to do this with and an antenna to pick the traffic up-- the 
NooElec and clones you can find on Amazon).

-Stacy

KG7QIN


On 12/07/2016 10:56 AM, Joe Moskalski wrote:
> I noticed you can generate POCSAG messages with app_rpt but is there a 
> way to decode them with it? I am looking to have it decode the message 
> and have a script act on received pocsag messages that match a set 
> criteria to say send a text or an email. All I need to know if it is 
> possible and if it his a point in the right direction as to how.
> Thank you!
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20161207/21582fe7/attachment.html>