[App_rpt-users] Remote control does not work if functions stanza is changed

[mike at midnighteng.com]

I can't reproduce the problem.

But, if I were to take a wild guess at this,
I am going to guess that you are describing parameters in your functions stanza
that should be outside of it in the general node setting area.

So look at it closely for such a error.

...mike/kb8jnm


> Can anybody test this on their node to see if it does the same thing? Just
> rename the functions stanza to functions_something and then rename
> functions = functions to functions = functions_something. Then see if you
> can remote control it from another node.
>
> I am running app_rpt version 0.325 10/19/2014
>
> On Tue, May 31, 2016 at 8:01 PM, Skyler F <electricity440 at gmail.com> wrote:
>
>> Node 1002 is a remote Allstar node on different hardware. In my case, I
>> tried it on a few different public Allstar nodes but I am just using the
>> numbers 1002 and 1001 as a generic example.
>>
>> On Tuesday, May 31, 2016, David McGough <kb4fxc at inttek.net> wrote:
>>
>>>
>>> Skyler,
>>>
>>> Okay about being connected and still no-go.
>>>
>>> Are nodes 1001 and 1002 on the same host or different hardware?
>>>
>>> 73, David KB4FXC
>>>
>>>
>>> On Tue, 31 May 2016, Skyler F wrote:
>>>
>>> > David,
>>> >
>>> > I do have the nodes connected together. The only difference is the name
>>> of
>>> > the functions stanza.
>>> >
>>> >
>>> >
>>> > On Tue, May 31, 2016 at 7:27 PM, David McGough <kb4fxc at inttek.net>
>>> wrote:
>>> >
>>> > >
>>> > > Do you have node 1002 connected to 1001 before issuing the remote
>>> command
>>> > > from to 1001 from 1002? The nodes must be connected for remote
>>> commands to
>>> > > work.
>>> > >
>>> > > Also, I don't think it's saying "I OWN COMMAND" ....Rather, it's
>>> saying:
>>> > >
>>> > > https://www.youtube.com/watch?v=0ccKPSVQcFk
>>> > >
>>> > >
>>> > > 73, David KB4FXC
>>> > >
>>> > > On Tue, 31 May 2016, Skyler F wrote:
>>> > >
>>> > > > Is this a bug or am I not supposed to do this in app_rpt? :
>>> > > >
>>> > > > Under my node this works fine:
>>> > > >
>>> > > > [1001]
>>> > > > functions = functions
>>> > > >
>>> > > > [functions]
>>> > > > DTMF stuff here
>>> > > >
>>> > > > IF I do this however,
>>> > > >
>>> > > > [1001]
>>> > > > functions = functionsVHF
>>> > > >
>>> > > > [functionsVHF]
>>> > > > DTMF stuff here
>>> > > >
>>> > > > Everything works EXCEPT if I do a remote command from another node,
>>> so
>>> > > if I
>>> > > > am on node 1002 and do *41001, it will say "I OWN COMMAND" but I
>>> can not
>>> > > > execute any DTMF successfully. If I do *41999 *70, I don't hear
>>> Allison's
>>> > > > pretty voice :-(
>>> > > >
>>> > > >
>>> > > > 73
>>> > > > Skyler KD0WHB
>>> > > >
>>> > >
>>> > >
>>> >
>>> >
>>> >
>>>
>>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.