[App_rpt-users] Remote control does not work if functions stanza is changed

[Skyler F]

Yes, you got me, I did not touch link_functions, which in my case just had
set to functions. Thanks

On Sun, Jun 5, 2016 at 6:22 AM, <mike at midnighteng.com> wrote:

>
> I can't reproduce the problem.
>
> But, if I were to take a wild guess at this,
> I am going to guess that you are describing parameters in your functions
> stanza
> that should be outside of it in the general node setting area.
>
> So look at it closely for such a error.
>
> ...mike/kb8jnm
>
>
> > Can anybody test this on their node to see if it does the same thing?
> Just
> > rename the functions stanza to functions_something and then rename
> > functions = functions to functions = functions_something. Then see if you
> > can remote control it from another node.
> >
> > I am running app_rpt version 0.325 10/19/2014
> >
> > On Tue, May 31, 2016 at 8:01 PM, Skyler F <electricity440 at gmail.com>
> wrote:
> >
> >> Node 1002 is a remote Allstar node on different hardware. In my case, I
> >> tried it on a few different public Allstar nodes but I am just using the
> >> numbers 1002 and 1001 as a generic example.
> >>
> >> On Tuesday, May 31, 2016, David McGough <kb4fxc at inttek.net> wrote:
> >>
> >>>
> >>> Skyler,
> >>>
> >>> Okay about being connected and still no-go.
> >>>
> >>> Are nodes 1001 and 1002 on the same host or different hardware?
> >>>
> >>> 73, David KB4FXC
> >>>
> >>>
> >>> On Tue, 31 May 2016, Skyler F wrote:
> >>>
> >>> > David,
> >>> >
> >>> > I do have the nodes connected together. The only difference is the
> name
> >>> of
> >>> > the functions stanza.
> >>> >
> >>> >
> >>> >
> >>> > On Tue, May 31, 2016 at 7:27 PM, David McGough <kb4fxc at inttek.net>
> >>> wrote:
> >>> >
> >>> > >
> >>> > > Do you have node 1002 connected to 1001 before issuing the remote
> >>> command
> >>> > > from to 1001 from 1002? The nodes must be connected for remote
> >>> commands to
> >>> > > work.
> >>> > >
> >>> > > Also, I don't think it's saying "I OWN COMMAND" ....Rather, it's
> >>> saying:
> >>> > >
> >>> > > https://www.youtube.com/watch?v=0ccKPSVQcFk
> >>> > >
> >>> > >
> >>> > > 73, David KB4FXC
> >>> > >
> >>> > > On Tue, 31 May 2016, Skyler F wrote:
> >>> > >
> >>> > > > Is this a bug or am I not supposed to do this in app_rpt? :
> >>> > > >
> >>> > > > Under my node this works fine:
> >>> > > >
> >>> > > > [1001]
> >>> > > > functions = functions
> >>> > > >
> >>> > > > [functions]
> >>> > > > DTMF stuff here
> >>> > > >
> >>> > > > IF I do this however,
> >>> > > >
> >>> > > > [1001]
> >>> > > > functions = functionsVHF
> >>> > > >
> >>> > > > [functionsVHF]
> >>> > > > DTMF stuff here
> >>> > > >
> >>> > > > Everything works EXCEPT if I do a remote command from another
> node,
> >>> so
> >>> > > if I
> >>> > > > am on node 1002 and do *41001, it will say "I OWN COMMAND" but I
> >>> can not
> >>> > > > execute any DTMF successfully. If I do *41999 *70, I don't hear
> >>> Allison's
> >>> > > > pretty voice :-(
> >>> > > >
> >>> > > >
> >>> > > > 73
> >>> > > > Skyler KD0WHB
> >>> > > >
> >>> > >
> >>> > >
> >>> >
> >>> >
> >>> >
> >>>
> >>>
> >>
> >> --
> >> Skyler Fennell
> >> amsatnet.info
> >> KDØWHB
> >> electricity440 at gmail.com
> >>
> >>
> >
> >
> > --
> > Skyler Fennell
> > amsatnet.info
> > KDØWHB
> > electricity440 at gmail.com
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> down to the
> > bottom of the page. Enter your email address and press the "Unsubscribe
> or edit
> > options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If
> > you have trouble unsubscribing, please send a message to the list
> detailing the
> > problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160605/aac2c2c7/attachment.html>