[App_rpt-users] Raspberry Pi3

[Steve Zingman]

It's a separate effort. I have not received my RPi3 yet. I have a few 
changes planned for the next rev for the Raspberry Pi2 and Pi3.

73, Steve N4IRS

On 03/21/2016 08:14 PM, Te Bussell wrote:
> What is the difference between ALLSTAR PI 3 efforts in the US and the UK?
>
> There is a recompiled PI 3 version at the UK ALLSTAR site. I was 
> looking at that until I read it does not yet support built-in WiFi.
>
> See this very short video: http://youtu.be/RjUHJ0DFon4
>
> KB9WKR
>
> Bill Bussell
>
> Sent from my iPad
>
> On Mar 21, 2016, at 7:26 PM, geoffrey mendelson 
> <geoffreymendelson at gmail.com> wrote:
>
>> On 3/21/2016 10:31 PM, Ryan Schultz wrote:
>>> The PI 3 has a 64-bit processor and the old PI 2 was only 32-bit, so 
>>> you may run into issues.
>> My friend who is the 3d printing community posted that his software 
>> (octoprint) does not run on the Pi3 unless you upgrade to the latest 
>> Debian Kernel. I expect you will have the same problem with other 
>> software too.
>>
>> Geoff.
>>
>> -- 
>> Geoffrey S. Mendelson 4X1GM/N3OWJ
>> Jerusalem Israel.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160321/1bd8759e/attachment.html>