[App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion

[kk6ecm]

run lsusb at the command line, then set devstr=<bus>-<device> for the
device(s) shown. Your example is for Bus 004 Device 002.

 

Bob

kk6ecm

73

 

  _____  

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Agee
Sent: Saturday, May 21, 2016 12:05 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] usbradio_tune_xxxxx.conf where .conf = .confusion

 

Hello list:

I've searched 

  <http://www.xelatec.com/xipar/node/180>
<http://www.xelatec.com/xipar/node/180> 

and I fully understand the description/explanations given. What I don't
understand, with specific attention to the lines:

; name=usb ;
; devnum=1 ;
devstr=4-2 ;

is how to manually uncomment, and manipulate them. In this particular
instance, I'm trying to get a DIAL box running with one original URI (early
version) using the USBRADIO channel driver, and one URIX (newer version)
using the SIMPLEUSB channel driver. I've followed the step-by-step (or was
that Crossbar 5 Duude?) instructions for starting off with a single node,
then adding the second node. That simply doesn't work. The second URIx green
L.E.D. stays solid throughout the process. Are these lines provided for
informational purposes only, or can they be edited to force the second
device to be recognized and assigned?

N5ZUA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160521/8eb8b1d0/attachment.html>