[App_rpt-users] Disable the TXENA

[Skyler F]

Thank you Monty, first, I meant rptena (my version says txena) but I
haven't been able to fix that issue, but isn't a really big deal.

If I can run shell scrips from a remote base node, I'm all for using that
functionality. I haven't been able to get cmd to work from it, however.

Remote VHF - 42622
Remote UHF - 40764

On Thursday, September 29, 2016, Monty <monty at ke7jvx.com> wrote:

> Hi Skyler,
>
> Not sure if you ever got a solution for this issue.  I was thinking along
> the lines Corey was.  If you set this node up as a traditional "Dumb"
> remote base, then when you go into Command Mode (*4) of that node, the
> remote base will not transmit.  That way you don't have to use the part of
> your script the enables and disables your transmitter.  Here's a overview
> of how to make it a traditional remote base:
>
> *rpt.conf:*
>
> [1234]
> rxchannel = SimpleUSB/usb        ; Set for your receive channel / device
> remote=y                         ; Set as "Dumb" node, as your script will handle the channel changes
> functions=functions-remote       ; Wherever your functions live
> phone_functions=functions-remote ; Wherever your functions live
>
> [nodes]
> 1234 = radio at 127.0.0.1/1234,NONE,y ; Remote base node
>
>
>
> Monty
>
> On Tue, May 3, 2016 at 4:55 PM, Skyler F <electricity440 at gmail.com
> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>> wrote:
>
>> Then I won't be able to hear the telemetry with the node that has just
>> connected to the remote base
>>
>> On Tue, May 3, 2016 at 5:54 PM, Tim Sawyer <tisawyer at gmail.com
>> <javascript:_e(%7B%7D,'cvml','tisawyer at gmail.com');>> wrote:
>>
>>> What about using the localplay command rather than the playback command?
>>>
>>> On Mon, May 2, 2016 at 2:06 PM, Skyler F <electricity440 at gmail.com
>>> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>> wrote:
>>>
>>>> When I do a playback from another LOCAL node, (sharing the same
>>>> rpt.conf), the remote base will play the audio file over it's transmitter.
>>>> I was able to solve this problem by disabling the transmitter for the
>>>> duration of the script so that it does not play any of the telemetry when
>>>> switching channels.
>>>>
>>>> Modifying app_rpt.c  to replace "RPTENA" with "" and then recompiling
>>>> asterisk did solve the issue so it won't announce anything when I re
>>>> activate the transmitter.
>>>>
>>>> 73
>>>> Skyler KDØWHB
>>>>
>>>> On Mon, May 2, 2016 at 9:42 AM, Tim Sawyer <tisawyer at gmail.com
>>>> <javascript:_e(%7B%7D,'cvml','tisawyer at gmail.com');>> wrote:
>>>>
>>>>> Are you sure you need to disable the TX? I'm pretty sure none of the
>>>>> telemetry comes out of the remote side.
>>>>>
>>>>> On Sun, May 1, 2016 at 4:53 PM, Skyler F <electricity440 at gmail.com
>>>>> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>> wrote:
>>>>>
>>>>>> Is it possible to disable the T X E N A announcement when re enabling
>>>>>> the transmitter? I have a script which disables the transmitter and
>>>>>> re-enables every time that I switch channels on my remote base. It is sort
>>>>>> of annoying that it goes throughout all links that have telemetry enabled.
>>>>>>
>>>>>> 73
>>>>>> Skyler
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at ohnosec.org
>>>>>> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit
>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>>>>> down to the bottom of the page. Enter your email address and press the
>>>>>> "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>>> the list detailing the problem.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> --
>>>>> Tim
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Skyler Fennell
>>>> amsatnet.info
>>>> KDØWHB
>>>> electricity440 at gmail.com
>>>> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>
>>>>
>>>
>>>
>>>
>>> --
>>> --
>>> Tim
>>>
>>
>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> <javascript:_e(%7B%7D,'cvml','App_rpt-users at ohnosec.org');>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mai
>> lman/listinfo/app_rpt-users and scroll down to the bottom of the page.
>> Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>

-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160930/7a8b588d/attachment.html>