[App_rpt-users] radio-tune-menu problem

[Steve Zingman]

Radio tune menu is for usbradio channel driver. use simple-usb-tune.

On 8/29/2017 1:30 PM, George Csahanin wrote:
> Folks, I've searched for solutions with this. But downloaded 
> RAT_RC1.img and put it in a SD card, etc, Pi3, etc. First issue was 
> the nodesetup erroring out and not setting up things like which 
> channel driver and so on, but I manually setup rpt.conf to be 
> simpleusb and the right node number, manually edited modules.conf to 
> enable simpleusb, manually setup simpleusb.conf. Now I have the node 
> where it works. Passes audio but went to setup levels. RX audio to net 
> is too high. I made a file for tune factrors in /etc/asterisk
>
> simpleusb_tune_usb_27170.conf :
>
> [usb]
> ; name=usb
> ; devicenum=0
> devstr=3-1
> rxmixerset=25
> txmixaset=999
> txmixbset=999
>
> The txmix settings work, the rx ones don't seem to. Same hardware, 
> other distro and could get the audio right.
>
> but...
>
> radio-tune-menu won't run:
>
> root at repeater:~# radio-tune-menu
> Error parsing device parameters
>
> I'm lost as to where to look. Running on my nodes either limey or 
> ACID. I had another person's image for the Pi but arch linux is a 
> nightmare (and this coming from a 21 year veteran of slackware). 
> Building a node for N5JGX, which I along with W8VT will be admin for. 
> So I downloaded RAT_RC1 figuring I'd stick with the successors, heirs 
> or designee of the founder.
>
> But hope someone can give me some direction where to look.
>
> If it can't parse device parameters...where do they live??
>
>
> Thanks All y'all
>
> GeorgeC
>
> W2DB 2360
>