[App_rpt-users] radio-tune-menu problem

[Steve Zingman]

Correction:
simpleusb-tune-menu

On 8/29/2017 1:34 PM, Steve Zingman wrote:
> Radio tune menu is for usbradio channel driver. use simple-usb-tune.
>
> On 8/29/2017 1:30 PM, George Csahanin wrote:
>> Folks, I've searched for solutions with this. But downloaded 
>> RAT_RC1.img and put it in a SD card, etc, Pi3, etc. First issue was 
>> the nodesetup erroring out and not setting up things like which 
>> channel driver and so on, but I manually setup rpt.conf to be 
>> simpleusb and the right node number, manually edited modules.conf to 
>> enable simpleusb, manually setup simpleusb.conf. Now I have the node 
>> where it works. Passes audio but went to setup levels. RX audio to 
>> net is too high. I made a file for tune factrors in /etc/asterisk
>>
>> simpleusb_tune_usb_27170.conf :
>>
>> [usb]
>> ; name=usb
>> ; devicenum=0
>> devstr=3-1
>> rxmixerset=25
>> txmixaset=999
>> txmixbset=999
>>
>> The txmix settings work, the rx ones don't seem to. Same hardware, 
>> other distro and could get the audio right.
>>
>> but...
>>
>> radio-tune-menu won't run:
>>
>> root at repeater:~# radio-tune-menu
>> Error parsing device parameters
>>
>> I'm lost as to where to look. Running on my nodes either limey or 
>> ACID. I had another person's image for the Pi but arch linux is a 
>> nightmare (and this coming from a 21 year veteran of slackware). 
>> Building a node for N5JGX, which I along with W8VT will be admin for. 
>> So I downloaded RAT_RC1 figuring I'd stick with the successors, heirs 
>> or designee of the founder.
>>
>> But hope someone can give me some direction where to look.
>>
>> If it can't parse device parameters...where do they live??
>>
>>
>> Thanks All y'all
>>
>> GeorgeC
>>
>> W2DB 2360
>>
>