[App_rpt-users] radio-tune-menu problem

[Kenneth Grimard]

Hi gorgeous

Try using the command

simpleusb-tune- menu

That is the correct one not
radio- tune- menu

The above is for the chan_ USB not chan_ simple

Ken n1dot


On Aug 29, 2017 13:30, "George Csahanin" <george at dyb.com> wrote:

> Folks, I've searched for solutions with this. But downloaded RAT_RC1.img
> and put it in a SD card, etc, Pi3, etc. First issue was the nodesetup
> erroring out and not setting up things like which channel driver and so on,
> but I manually setup rpt.conf to be simpleusb and the right node number,
> manually edited modules.conf  to enable simpleusb, manually setup
> simpleusb.conf. Now I have the node where it works. Passes audio but went
> to setup levels. RX audio to net is too high. I made a file for tune
> factrors in /etc/asterisk
>
> simpleusb_tune_usb_27170.conf :
>
> [usb]
> ; name=usb
> ; devicenum=0
> devstr=3-1
> rxmixerset=25
> txmixaset=999
> txmixbset=999
>
> The txmix settings work, the rx ones don't seem to. Same hardware, other
> distro and could get the audio right.
>
> but...
>
> radio-tune-menu won't run:
>
> root at repeater:~# radio-tune-menu
> Error parsing device parameters
>
> I'm lost as to where to look. Running on my nodes either limey or ACID. I
> had another person's image for the Pi but arch linux is a nightmare (and
> this coming from a 21 year veteran of slackware). Building a node for
> N5JGX, which I along with W8VT will be admin for. So I downloaded RAT_RC1
> figuring I'd stick with the successors, heirs or designee of the founder.
>
> But hope someone can give me some direction where to look.
>
> If it can't parse device parameters...where do they live??
>
>
> Thanks All y'all
>
> GeorgeC
>
> W2DB 2360
>
> --
> George Csahanin
> 10100 Carson Ranch Rd.
> Crowley, TX 76036
> 682-708-5716 home
> 401-338-0568 cel
> http://dyb.com
> PLEASE NOTE: Effective January 1, 2018 george at dyb.com will no longer
> function
> USE george at w2db.com
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/c
> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170829/38deda19/attachment.html>