[App_rpt-users] RAT_rc1 on Pi3 a no joy

Steve Zingman szingman at msgstor.com
Thu Aug 31 03:07:58 UTC 2017 

If asterisk is not running, use asterisk -vvvcd

Sent via smoke signal (Verizon)
On Aug 30, 2017 11:05 PM, Bob <k6ecm1 at gmail.com> wrote:

When tried again

xxxxxxx:~# asterisk -rvvv
Asterisk 1535, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster at digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
detail  s.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)



-----Original Message-----
From: Bob [mailto:k6ecm1 at gmail.com]
Sent: Wednesday, August 30, 2017 8:01 PM
To: 'Users of Asterisk app_rpt'
Subject: RE: [App_rpt-users] RAT_rc1 on Pi3 a no joy


Verbosity was 0 and is now 3
[Aug 30 19:59:55] NOTICE[655]: app_rpt.c:22032 rpt_master: RPT thread
restarted on 1901
[Aug 30 19:59:55] WARNING[655]: app_rpt.c:22044 rpt_master: rpt_thread
restarted on node 1901
    -- Re-Loading config for repeater 1901
    -- rpt (Rx) initiating call to Radio/usb on Radio/usb
  == Set device 1-1.2:1.0 to usb
[Aug 30 19:59:55] WARNING[693]: chan_usbradio.c:1744 hidthread: File
usbradio_tune_usb.conf not found, device usb using default parameters.
xxxxxxx*CLI>
Disconnected from Asterisk server
Executing last minute cleanups

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Steve Zingman
Sent: Wednesday, August 30, 2017 7:55 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy

rename usbradio_tune_usb.conf to usbradio_tune_usb.conf.save and see
what happens.
Check modules.conf for only the proper channel driver loaded.

Steve

On 08/30/2017 10:50 PM, Bob wrote:
> Bob here, not out of the woods quite yet.
>
> I'm replacing a private node computer with a RPi3. I've started with
copying
> over the /etc/asterisk/*.conf files. Asterisk is crashing on me at regular
> intervals. Here are the errors I'm receiving. Each time the message
> "--Re-loadign config for repeater..." occurs seems to correspond with the
> green light going solid instead of pulsing.
>
> Any ideas are appreciated.
>
> Thanks,
> Bob
>
> Verbosity was 0 and is now 3
> [Aug 30 19:43:52] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread
> restarted                                 on 1901
> [Aug 30 19:43:52] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread
> restarted                                 on node 1901
>      -- Re-Loading config for repeater 1901
>      -- rpt (Rx) initiating call to Radio/usb on Radio/usb
>    == Set device 1-1.2:1.0 to usb
> [Aug 30 19:43:52] WARNING[794]: chan_usbradio.c:1743 hidthread: Loaded
> parameter                                s from usbradio_tune_usb.conf for
> device usb .
> [Aug 30 19:43:54] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread
> restarted                                 on 1901
> [Aug 30 19:43:54] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread
> restarted                                 on node 1901
>      -- Re-Loading config for repeater 1901
>      -- rpt (Rx) initiating call to Radio/usb on Radio/usb
>    == Set device 1-1.2:1.0 to usb
> [Aug 30 19:43:54] WARNING[796]: chan_usbradio.c:1743 hidthread: Loaded
> parameter                                s from usbradio_tune_usb.conf for
> device usb .
> [Aug 30 19:43:56] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread
> restarted                                 on 1901
> [Aug 30 19:43:56] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread
> restarted                                 on node 1901
>      -- Re-Loading config for repeater 1901
>      -- rpt (Rx) initiating call to Radio/usb on Radio/usb
>    == Set device 1-1.2:1.0 to usb
> [Aug 30 19:43:56] WARNING[798]: chan_usbradio.c:1743 hidthread: Loaded
> parameter                                s from usbradio_tune_usb.conf for
> device usb .
> [Aug 30 19:43:58] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread
> restarted                                 on 1901
> [Aug 30 19:43:58] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread
> restarted                                 on node 1901
>      -- Re-Loading config for repeater 1901
>      -- rpt (Rx) initiating call to Radio/usb on Radio/usb
>    == Set device 1-1.2:1.0 to usb
> [Aug 30 19:43:58] WARNING[800]: chan_usbradio.c:1743 hidthread: Loaded
> parameter                                s from usbradio_tune_usb.conf for
> device usb .
> [Aug 30 19:44:00] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread
> restarted                                 on 1901
> [Aug 30 19:44:00] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread
> restarted                                 on node 1901
>      -- Re-Loading config for repeater 1901
>      -- rpt (Rx) initiating call to Radio/usb on Radio/usb
>    == Set device 1-1.2:1.0 to usb
> [Aug 30 19:44:00] WARNING[802]: chan_usbradio.c:1743 hidthread: Loaded
> parameter                                s from usbradio_tune_usb.conf for
> device usb .
> [Aug 30 19:44:02] ERROR[764]: app_rpt.c:22027 rpt_master: Continual RPT
> thread restarts, killing Asterisk
>
> -----Original Message-----
> From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
On
> Behalf Of Steve Zingman
> Sent: Wednesday, August 30, 2017 8:12 AM
> To: app_rpt-users at lists.allstarlink.org
> Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy
>
> Oh what a surprise, a PS issue with a Pi. ;)
> do the following as root:
> touch /etc/asterisk/firsttime
> firsttime
>
> Or, if all you want to do is set the TZ.
> dpkg-reconfigure tzdata
>
>
> On 8/30/2017 11:08 AM, Bob Pyke wrote:
>> Powersupply (sigh!!!)
>>
>> Asterisk is happy. Is ther a first time script for setting up time zone
or
> is this manual?
>> Thanks,
>> Bob
>>
>> Sent from my iPhone
>>
>>> On Aug 30, 2017, at 5:50 AM, Steve Zingman <szingman at msgstor.com> wrote:
>>>
>>> We have not had any reports of crashing on a RPI3 I have a test node
> built on a RPI3 that I use to verify proper operation.
>>> The ssh file is at /etc/ssh/sshd_config
>>>
>>> 73, Steve N4IRS
>>>
>>>> On 8/30/2017 8:45 AM, Bob Pyke wrote:
>>>> Not able to get past the Linux continual crashing and rebooting. The
> experience is quite similar on two RPi3s. It does not crash on an RPi2,
> which has allowed me to poke around this build a bit. I can't locate the
ssh
> file for edit. This build does not seem to follow the docs.Allstarlink
> website for file name and location.
>>>> The original RPi build seems to work on both variants of RPi.
>>>>
>>>> Thanks,
>>>> Bob
>>>>
>>>> Sent from my iPhone
>>>>
>>>>>> On Aug 29, 2017, at 9:42 PM, Bryan Fields <Bryan at bryanfields.net>
> wrote:
>>>>>> On 8/30/17 12:41 AM, Bob Pyke wrote:
>>>>>> Asterisk does not start.
>>>>> What do the logs say?  Can you run asterisk in the foreground and see
> what it
>>>>> outputs as errors?
>>>>>
>>>>> --
>>>>> Bryan Fields
>>>>>
>>>>> 727-409-1194 - Voice
>>>>> http://bryanfields.net
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/
cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the
page. Enter your email address and press the "Unsubscribe or edit options
button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170830/4699292a/attachment.html>

More information about the App_rpt-users mailing list