[App_rpt-users] Newbie

[Steve Agee]

Also if you go to the CLI and execute the command:

CLI> iax2 show registry

Then you should get back something like this for your node number:

TRS*CLI> iax2 show registry
Host                  dnsmgr  Username    Perceived Refresh  State
67.215.233.178:4569   Y  27715   38.100.148.43:4569  60  Registered

N5ZUA

On 12/10/2017 11:09 PM, Ryan Mayton wrote:
> Hello from North West Indiana.
> I'm trying to get connected. I am using a GM300 simplex node, with a Pi3 connected to a URIx interface. In the /etc/asterisk/simpleusb file I have changed carrier from=to USB invert, and also ctcssfrom = to USB
> I'm getting no courtesy tone and I don't see my node green on the node list, matter of fact it's the only gray one on the list.
> Can anybody guide me in the right direction?
>
> Thanks Ryan KC9ZSU
> Sent from my iPhone
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.