[App_rpt-users] Changing from radioless dahdi to simpleusb

[Will Bashlor]

Nm, I forgot sudo. Shame on me lol. I get so used to no sudo it’s hard to remember. I’ll go through and see what it will allow me to setup…

 

From: Will Bashlor [mailto:will at bashlor.com] 
Sent: Wednesday, December 13, 2017 9:12 AM
To: 'Users of Asterisk app_rpt' <app_rpt-users at lists.allstarlink.org>
Subject: RE: [App_rpt-users] Changing from radioless dahdi to simpleusb

 

Thanks for the replies. It seems Linux sees the CM108 FOB, but it's like AllStar isn't communicating with it. Is there a setting somewhere to tell it what USB bus and port to use, or does it find it automatically? I also tried to use simpleusb-tune-menu to configure it but I get the error below.

 

pi at raspberrypi:/usr/sbin $ ./simpleusb-tune-menu

Error parsing device parameters

pi at raspberrypi:/usr/sbin $

 

-----Original Message-----
From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Bryan Fields
Sent: Tuesday, December 12, 2017 3:51 PM
To: Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org <mailto:app_rpt-users at lists.allstarlink.org> >
Subject: Re: [App_rpt-users] Changing from radioless dahdi to simpleusb

 

On 12/12/17 3:42 PM, Steve Zingman wrote:

> dahdi/pseudo needs chan_dahdi.so

 

I stand corrected.  I forgot about the pseudo driver.

 

-- 

Bryan Fields

 

727-409-1194 - Voice

 <http://bryanfields.net> http://bryanfields.net

_______________________________________________

App_rpt-users mailing list

 <mailto:App_rpt-users at lists.allstarlink.org> App_rpt-users at lists.allstarlink.org

 <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

 

To unsubscribe from this list please visit  <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171213/ebae2bb8/attachment.html>