[App_rpt-users] Migration Issues

[David KE6UPI]

Hello Jamey, If your time is off it might not connect to the ASL servers..
If you have ntp installed you can edit the /etc/ntp.conf and make the
changes there. If your using a DHCP make the changes to your DHCP server.

David
KE6UPI

On Fri, Jan 6, 2017 at 10:54 AM, Jamey Wright <Jamey.Wright at morgan911.org>
wrote:

> I just migrated one of my nodes from ACID to DIAL.  It is up and running
> fine but I have a couple of things that need to be addressed.
>
>
>
> First, it is no longer showing up on the Allstar Status Pages.  When I
> connected it to one of my other nodes the Allstar site showed the correct
> info in the bubble display.  Is there a command I can run to force
> registration or is there a logfile that might show errors?
>
>
>
> Second, during the install I saw where it was trying to sync to time
> servers.  I block access to time servers external to my network since I
> have a Stratum 1 NTP server on my network.  Where can I change the NTP
> settings?  I am not a Linux guru so a full path is appreciated.
>
>
>
> Jamey Wright – WR4JW
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/
> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page.
> Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170106/3da0c823/attachment.html>