[App_rpt-users] Initial DIAL startup failure

[Bob Pyke]

What are the indicators asterisk is running, but not talking to the RA-35.

Bob

Sent from iPad


> On Nov 19, 2017, at 2:08 PM, mca555 at mac.com wrote:
> 
> Hi,
> 
> I’m trying to build a simple AllStar node using a Pi3 with an RA-35 interface.  Maybe I’m using the wrong documentation.  The FAQ says to do the initial login with “repeater” and “allstarlink”.  This didn’t work for me.  I poked around and found that earlier versions used “root” and “debian”.  That worked, but didn’t run the firsttime script.  I managed to get firsttime script to run manually.  The Allstar service appears to be running but won’t talk to the RA-35.  I did confirm that the hardware is functioning by successfully installing “that other” allstar build.  Anybody have a clue as to the error in my ways?
> 
> Thanks!
> Mark
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.