[App_rpt-users] RTCM Inbound (Eth Rx) packet out of bounds

[Tim Sawyer]

My RTCM is set to half duplex. The switch is a MikroTik router. I'll try
full duplex and see what happens.

So Bryan, you don't have any these "Voter lost master timing source!!" messages
in your Asterisk log?

On Wed, Nov 29, 2017 at 4:53 PM, Bryan Fields <Bryan at bryanfields.net> wrote:

> On 11/29/17 7:07 PM, Jesse Lloyd wrote:
> > I suspect that if you get a packet collision using the 10 Mbps 1/2
> duplex then
> > the delayed packet used for timing breaks things... this is a guess at
> this point.
>
> What kinda of switch do you have this connected to?  A proper switch should
> eliminate any collisions.  I have an EX everything plugs into, and you will
> need to set the RTCM to full duplex and manually configure the switch to
> 10/full.  The RTCM doesn't do auto negotiation, and the switch will
> default to
> 10/half if it fails (this is the 802.3 standard)
>
> 73's
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
--
Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20171129/35eb820a/attachment.html>