[App_rpt-users] 888 and usb

[Neil k8it]

I am willing to work with you, to get it working.
please send me a direct email with your contact info and when you are 
available.
I am blind but have multiple allstar under my control.
uour first node is always a challenge.
having flat audio from the receiver is essential.

also in your email please answer what instructions have you used to wire up 
the 888 radio and modify the uri



Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479

--------------------------------------------------
From: "David Waters" <dwaters5 at yahoo.com>
Sent: Sunday, February 04, 2018 6:04 PM
To: <app_rpt-users at lists.allstarlink.org>
Subject: [App_rpt-users] 888 and usb

> I have a modified 888 radio and run through a modified fob to my AllStar 
> node. The problem is when sending a DTMF command the computer never 
> receives it and displays a 6~. On screen. Tried everything under usb 
> simple to get it to work but nothing works. Someone said to use us radio. 
> Conf but I don’t know how to force the AllStar software to run that file. 
> It picks us simple.conf instead. Any help would be appreciated. Keep in 
> mind I know nothing about AllStar software I am just learning.
>
> David Waters
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and 
> scroll down to the bottom of the page. Enter your email address and press 
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message to 
> the list detailing the problem.