[App_rpt-users] NanoPi

Thu Jul 26 12:52:16 UTC 2018

Hi Steve

Thanks that worked..  However now all seems to  load and registers OK but
SimpleUSB wont loa/run  ?

return email: Bob at Fot.com.au

NODE=47324

REGPASS=47324:xxxxxx at register.allstarlink.org               ; This must be
changed to your node number, password 

Call sign:  VK6ZGN                            

Interface type:  SimpleUSB/usb_47324  ; SimpleUSB 

Echolink Callsign: INVALID

Echolink node: 000000  ASL node used: 

Ping test to 8.8.8.8

PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.

64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms

64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms

64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms

64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms

--- 8.8.8.8 ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3004ms

rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms

Ping test to register.allstarlink.org

PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50
time=209 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50
time=208 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50
time=208 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50
time=208 ms

--- register.allstarlink.org ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3004ms

rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms

Ouput of ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.168.39  netmask 255.255.255.0  broadcast
192.168.168.255

        inet6 fe80::4f:49ff:fe38:5803  prefixlen 64  scopeid 0x20<link>

        ether 02:4f:49:38:58:03  txqueuelen 1000  (Ethernet)

        RX packets 1641  bytes 149786 (146.2 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 1781  bytes 554581 (541.5 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

        device interrupt 33  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1000  (Local Loopback)

        RX packets 16  bytes 1312 (1.2 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 16  bytes 1312 (1.2 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Output of lsmod grep dahdi

dahdi                 200704  28

IAX2 registry

Host                  dnsmgr  Username    Perceived             Refresh
State

67.215.233.178:4569   Y       47324       58.178.114.94:64301        60
Registered

Asterisk version:

Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l running
Linux on 2018-03-07 14:53:41 UTC

Current date and time: 2018-07-26.04:32

updatenodelist service running?

root       682  0.0  0.4   4428  2384 ?        Ss   04:29   0:00 /bin/bash
/usr/local/bin/rc.updatenodelist &

root      1650  0.0  0.1   3764   560 pts/2    S+   04:35   0:00 grep
updatenodelist

/tmp/rpt_extnodes-temp file

-rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp

/var/lib/asterisk/rpt_extnodes file

-rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes

####### Begin warnings from messages file

[Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters from
simpleusb_tune_usb_47324.conf for device usb_47324 .

[Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open DSP
device 1 (usb_47324): No such file or directory

[Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open DSP
device 1 (usb_47324): No such file or directory

And so on forever !!

####### Begin warnings from messages.1 file

73

Bob

VK6ZGN

From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On
Behalf Of Steve Zingman
Sent: Wednesday, 25 July 2018 17:58
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] NanoPi

Bob,
It looks like DKMS did not rebuild DAHDI properly.

Please do as root:
dpkg-reconfigure asl-dahdi-linux-dkms
reboot

Should now be fixed. Check DAHDI is running by:
lsmod | grep dahdi

73, Steve N4IRS

On 07/25/2018 04:38 AM, Bob Good wrote:

Hi Guys

I have tried loading  ASL_1.01-20180228-armhf-nanopi image onto a NanoPi

Seems to load fine I run the updates etc then the Menu all seems OK but
AllStar does not seem to run ?

return email: bob at Fot.com.au

NODE=47324

REGPASS=47324:xxxxx at register.allstarlink.org               ; This must be
changed to your node number, password 

Anyone got any ideas ??

73

VK6ZGN
Bob                     <mailto:Bob at Fot.com.au> Bob at Fot.com.au 
Western Australia                          Mob.
<tel:61%C2%A0%20%280%29%20418%20902%20194> 61  (0) 418 902 194 

The contents of this e-mail (including any attachments) may be 
confidential and privileged. Any unauthorised use of this document 
or it's contents is prohibited. If you have received this e-mail in 
error, please notify us immediately and erase this document 
E&OE 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
scroll down to the bottom of the page. Enter your email address and press
the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email
confirmation. If you have trouble unsubscribing, please send a message to
the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180726/58c1f76b/attachment.html>