[App_rpt-users] LOG

[ldrolet at cgocable.ca]

Hello Tim,

I already have different names for each of my users, see part of my IAX.CONF
I want to know when it's LOG the date and Heur if possible

How can I make LOGs with a Raspberry PI and version of Mr. Crompton 1.5
with a NODE Private

Thank you for your help

Luc

;-------------------------------------------------------------

;register => 1400:@register.allstarlink.org
;register => xxxxx:yyyyyy at register.allstarlink.org

[radio-proxy]
type=user
;deny=0.0.0.0/0.0.0.0
;permit=0.0.0.0/255.255.255.255
context=radio-secure-proxy
disallow=all
allow=g726aal2
allow=ilbc
transfer=no


[radio-proxy-out]
type=peer
host=
; add your node number as username
username=1400
; add your node password as secret
secret=
auth=md5
disallow=all
allow=g726aal2
allow=ilbc
transfer=no

;-------------------------
;-------------------------
;-------------------------
; IAXRPT Example
;------------------------

[iaxrpt]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
; add a password of your selection for secret              
secret=1234  ; *** Important! Change this!!!
host=dynamic      
disallow=all
allow=ulaw  
allow=gsm        
transfer=no

;--------------------------
;---DEBUT DES COMPTS iaxrpt-----
;---------------------------

[VE2LUQ]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=door
host=dynamic   
disallow=all
allow=ulaw  
allow=gsm        
transfer=no

[VA2RTP]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=red
host=dynamic    
disallow=all
allow=ulaw  
allow=gsm        
transfer=no


[VE2ABC]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=total
host=dynamic   
disallow=all
allow=ulaw  
allow=gsm        
transfer=no

[VE2LES]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=tape
host=dynamic 
disallow=all
allow=ulaw  
allow=gsm        
transfer=no

[VA2VDL]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=plug
host=dynamic    
disallow=all
allow=ulaw  
allow=gsm        
transfer=no


[VA2CDY]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=meter
host=dynamic    
disallow=cdy
allow=ulaw  
allow=gsm        
transfer=no


[VE2ODB]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=rang
host=dynamic   
disallow=all
allow=ulaw  
allow=gsm        
transfer=no

[VE2JMO]
user=iaxrpt
type=user          
context=radio-iaxrpt   
auth=md5
secret=power
host=dynamic   
disallow=all
allow=ulaw  
allow=gsm        
transfer=no



Original email:
-----------------
From: Tim Sawyer tisawyer at gmail.com
Date: Sat, 17 Mar 2018 06:55:40 -0700
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] LOG


In iax.conf there is a stanza named [iaxclient]. That's where IAXRPT and
Zoiper login. Duplicate that stanza and then give it new stanza heading
such as [zoiper]. Change the secret if a different one is desired for
zoiper. Then restart Asterisk.

On Fri, Mar 16, 2018 at 7:04 PM, Luc Drolet <ldrolet at cgocable.ca> wrote:

> Hello everyone,
>
> I would like to have LOGS from my used IAXRPT and ZOIPER so they all have
> a different usernames and passwords
>
> with XELATEC we could make these reports,
> but with ALLSTAR Version https://hamvoip.org/RPi2/RPi2-
> 3_V1.5rc16_Allstar.exe from Mr. Crompton is it possible to do this type
> of report to find out who is using these programs
>
> my NODE is not connecting with ALLSTAR, it's a private NODE
> I use a raspberry PI 3
>
> is it possible to make these LOGs
>
> Thank you for your help
>
> Luc
> VE2LUQ
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.




-- 
Tim WD6AWP


--------------------------------------------------------------------
mail2web LIVE ? Free email based on Microsoft? Exchange technology -
https://link.mail2web.com/LIVE