[App_rpt-users] Radio-tune-menu not functioning

[Steve Zingman]

Geoff,
You have it correct. If you try to run radio-tune menu as user repeater, 
you do get the error. Running it with sudo radio-tune-menu works. The 
user repeater does have sudo privileges, which allow you to run a 
command with elevated rights.
If you do not want to have to type sudo, you can either run sudo -s or 
set the root password (which is NOT set by default) and then use su.

73, Steve N4IRS


On 3/28/2018 8:00 AM, ARS W5OMR wrote:
> In my case, it was a permissions issue.
> User 'repeater' is supposed to have sudo (sudo -l) rights, but every 
> time I tried to enter a command on ASL 1.01, it had to be proceeded 
> with 'sudo'.
>
> Try 'sudo radio-tune-menu' and see what happens.
>
> 73
> W5OMR
>
> On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John at n2yp.com 
> <mailto:John at n2yp.com>> wrote:
>
>     I'm at a loss. I upgraded my Dial system to the new All Star Link
>     1.0 and am have a few issues. When I try and run radio-tune-menu I
>     get
>
>     root at N2YP_Rogers_Knob:~# radio-tune-menu
>     Error parsing device parameters
>
>     I've read through past messages and checked that chan_usbradio was
>     the active one in modules and that simple USB was set for no load.
>     Also as of right now my nodes load with the URI's and sort of
>     function as they are. Even when no radios are hooked up they
>     lockup in "transmit" mode. I've tried rebooting the system and any
>     other suggestions I could find with no luck. I've tried with both
>     new and old conf files with no success.
>     John Rudolph
>     Amateur Radio Op N2YP
>     Unadilla,NY
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180328/624617bf/attachment.html>