[App_rpt-users] Assistance with Radio Operation

[Martin Boroff]

Mike

I think the problem is in the pi.

I thought I may have tried to define usbradio but I am not 100% sure. I will attach the conf files with my codename on them. I’m not sure what you mean by which file I use. Where would I look to see which one I use.

The radio is a Ten Ten Patriot usb transceiver I am using for testing. It connects with a Ten Ten USB sound card and has leads for ground, mic, audio out and PTT. I plan to later connect a Yeasu FTM100DR which I hope to operate remotely. 


73, Marty

-------------- next part --------------
A non-text attachment was scrubbed...
Name: simpleusb_tune_usb_49155.conf
Type: application/applefile
Size: 89 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181021/5b1f888e/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: usbradio_tune_usb_49155.conf
Type: application/applefile
Size: 88 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181021/5b1f888e/attachment-0001.bin>
-------------- next part --------------



> On Oct 21, 2018, at 1:12 PM, Mike <mm at midnighteng.com> wrote:
> 
> Iis the problem system a pi or pc ?
> 
> Radio interface simpleusb.conf or usbradio.conf ?
> 
> Show the contents of that file you use.
> 
> Is the radio interface a modified sound dongle or something else ?
> 
> I'm trying to determine how you should be getting your cos/ptt and then looking at your set-up for it. But it sounds like your PTT is not inverted correctly for the radio or you can't sink enough current to pull it active.
> 
> ...mike/kb8jnm
> 
> On 10/21/2018 1:12 PM, Martin Boroff wrote:
>> I have my server node running, 49155. I am able to use it to connect to another node with iaxrpt and speak with an echo link user.
>> I have hooked up my sound card with a radio that will run fldigi on another raspberry pi with Jessie installed. Therefore I am confident that my hardware and wiring are ok. The card is a usb card.
>> lsusb shows The first device listed is my sound card.
>> When I connect to my node I have been using the keypad when the call ok appears. I enter *34911. When I speak the mic meter is indicating audio but my radio does not key.
>> I am attaching copies of rpt.conf manager.conf modules.conf
>> Please let me know if you need anything else from asterisk directory.
>> Thank you.
>> Martin Boroff, WD9GYM
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.