[App_rpt-users] Remote Base Questions

[Rachel Olivero]

Good evening all:

I presently have my TM-D700 connected to a Raspberry Pi with a URI and
configured as a remote base. I'm using iaxRpt to control/use it.
I'm noticing that if there is received audio and I transmit, everything
works fine. When I unkey, I get the repeater audio immediately back over
iaxRpt. However, if I transmit to a repeater that has had no carrier
previously, I don't hear any returned audio. I've stood next to the
radio and verified that I am keying the repeater. Tonight, a station
responded and I got no audio until the carrier dropped and a new signal
was detected. I'm not sure if this is a D700 issue, a URI issue, or an
app_rpt issue. I'm open to any suggestions.
One other question, I defined an archivedir in rpt.conf, but I don't see
audio files in the directory. I see the promised text file, but no
audio. Did I miss a step?
Thanks,
Rachel AD9O
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180901/d6708547/attachment.html>