[App_rpt-users] Remote Base Questions

[Rachel Olivero]

Mike,

Thanks. I can check the COS logic. If it were inverted though, would I be receiving anything? I definitely get signal as long as the carrier is active before I transmit.

I'll check permissions too. 

On Sat, Sep 1, 2018, at 20:42, Mike wrote:
> While I can't say for sure,
> it sounds like you have the logic inverted on your cos of the remote 
> base. If I am reading you right.
> 
> The archive directory must exist. look for type errors both in your 
> definition in rpt.conf and the actual directory would be the first thing 
> in your checks.
> archivedir=/var/www/html/somewhere/archive
> It will only create a director <NODE#> to put the data in if it finds 
> the defined path to do it.
> Also check ownership and permissions of the directory.
> 
> Hope that gets you somewhere.
> 
> ...mike/kb8jnm
> 
> On 9/1/2018 9:12 PM, Rachel Olivero wrote:
> > Good evening all:
> > 
> > I presently have my TM-D700 connected to a Raspberry Pi with a URI and
> > configured as a remote base. I'm using iaxRpt to control/use it.
> > I'm noticing that if there is received audio and I transmit, everything
> > works fine. When I unkey, I get the repeater audio immediately back over
> > iaxRpt. However, if I transmit to a repeater that has had no carrier
> > previously, I don't hear any returned audio. I've stood next to the
> > radio and verified that I am keying the repeater. Tonight, a station
> > responded and I got no audio until the carrier dropped and a new signal
> > was detected. I'm not sure if this is a D700 issue, a URI issue, or an
> > app_rpt issue. I'm open to any suggestions.
> > One other question, I defined an archivedir in rpt.conf, but I don't see
> > audio files in the directory. I see the promised text file, but no
> > audio. Did I miss a step?
> > Thanks,
> > Rachel AD9O
> > 
> > 
> > 
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > 
> > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> > 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and 
> scroll down to the bottom of the page. Enter your email address and 
> press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.