[App_rpt-users] After downloading?

Brian G gravesb at gmail.com
Mon Jan 7 01:49:03 UTC 2019


Can't connect from  here.

You'd need to open port 4569 (UDP) to allow incoming connections.

Apache: sudo apt-get install apache2


On Sun, Jan 6, 2019 at 8:41 PM Jim Hertel <n6kmr at frontiernet.net> wrote:

> Ok all you guru's,
>
> I downloaded the current ASL.img program, installed it and ran it,
> populated the first time user setup routine. I hope I got it right. I
> currently can't connect to a station or node like Larry KR6AZ node
> 46822. Are there any Elmer's out there that can help in Laymans terms
> too? some of this stuff is way over my head at times. I bet I have to
> open a Port up, which ones?
>
> Also, info I have the Pi3 as the computer. Also running a RIM-RC210/RLC
> to the RC210 repeater controller.
>
> If you can please try my node  47379 to see if it works from your end.
>
> Is there a decent manual for the ASL version of Allstar? I may have
> missed it, so tell me where.  I did download the HAMVIOP version manual
> but that was confusing and didn't jive with ASL's to much so i didn't
> venture there too much.
>
> I also didn't find a Apache http//: program in there while Putty'ing
> around, is there one?
>
> By the way I also have IRLP 7966 that works great on a pi...and the
> echolink too..
>
> By the way thanks in advance.
>
> Jim n6kmr
>
> _________________________________________
>
> Modoc County Emergency Group
>
> Repeaters 145.490, 147.075, 147.045, 444.250 PL 100
>
> Allstar 47397
>
> IRLP 7966
>
> Echolink 51691
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190106/85c1f8e7/attachment.html>


More information about the App_rpt-users mailing list