[App_rpt-users] After downloading?

[Nate Hardman]

apache webserver is not installed by default.  not everyone uses it
you need to open which ever port you are configured to use in your router
and forward it to the IP your node is using. you will have to consult your
routers manual for this.
look in /etc/asterisk/iax.conf   for  bindport=????  most likely it's
bindport=4569

also. it doesn't not appear your node is registering with the ASL servers
which would explain why you can not connect to other nodes and they can not
connect to you.
check your /etc/asterisk/iax.conf file for the register=
NODE:PASSWORD at register.allstarlink.org  line and ensure it is not commented
out with a ( ; ) semi-colon in front of the line.
you may also check that the node is registered with
sudo asterisk -rx "iax2 show registry"

also check that the updatenodeslist service is running and has downloaded
the list of nodes.  /var/lib/asterisk/rpt_extnodes file should exist and is
the "phone book" for Allstar

and while you are editing config files manually.  check
/etc/asterisk/rpt.conf  for the line starting with statpost=   and
uncomment that line by removing the semi-colon in the very front.




On Sun, Jan 6, 2019 at 8:41 PM Jim Hertel <n6kmr at frontiernet.net> wrote:

> Ok all you guru's,
>
> I downloaded the current ASL.img program, installed it and ran it,
> populated the first time user setup routine. I hope I got it right. I
> currently can't connect to a station or node like Larry KR6AZ node
> 46822. Are there any Elmer's out there that can help in Laymans terms
> too? some of this stuff is way over my head at times. I bet I have to
> open a Port up, which ones?
>
> Also, info I have the Pi3 as the computer. Also running a RIM-RC210/RLC
> to the RC210 repeater controller.
>
> If you can please try my node  47379 to see if it works from your end.
>
> Is there a decent manual for the ASL version of Allstar? I may have
> missed it, so tell me where.  I did download the HAMVIOP version manual
> but that was confusing and didn't jive with ASL's to much so i didn't
> venture there too much.
>
> I also didn't find a Apache http//: program in there while Putty'ing
> around, is there one?
>
> By the way I also have IRLP 7966 that works great on a pi...and the
> echolink too..
>
> By the way thanks in advance.
>
> Jim n6kmr
>
> _________________________________________
>
> Modoc County Emergency Group
>
> Repeaters 145.490, 147.075, 147.045, 444.250 PL 100
>
> Allstar 47397
>
> IRLP 7966
>
> Echolink 51691
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 

Nathan Hardman
nhardman1428 at gmail.com
N8THN at ARRL.NET
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190106/2c7b76b0/attachment.html>