[App_rpt-users] Connection fail message

[Joe C]

Where did you find that up address? That’s not my IP address and my node shows something different.

73,
Joe
K2ol 

Sent from my iPad

> On Mar 26, 2019, at 10:02 PM, Bryan Fields <Bryan at bryanfields.net> wrote:
> 
>> On 3/26/19 9:44 PM, Joe C wrote:
>> I checked the iax.conf and my passcode was there. I did another reboot with
>> no change. So odd cause when I key my radio it’s responding with my call
>> sign and tone. It’s not showing up on allstar and giving me a connection
>> fail upon trying to key another node.
> 
> Your node password is incorrect:
> 
> [Mar 27 01:53:30] Host 108.41.61.124 failed MD5 authentication for '46988'
> 
> Unless 108.41.61.124 is not your IP, then we may bigger problems :)
> 
> Once you fix your node password based on what's in the portal you will
> register and then pull a rpt_extnodes file.
> 
> Be sure to do 'iax2 reload' from asterisk after you change the config in
> iax.conf.  'iax2 show registry' will show you your registration status.
> 
> Once you have this working, give it a few min and it should pull a nodes list,
> then check it using 'tail -n6  /var/lib/asterisk/rpt_extnodes'
> 
> ;Generated 3264 records in 0.058 seconds.
> ;Served in 0.012 seconds.
> ;Served from cache: Yes
> ;Generated at 2019-03-27 01:55:00 UTC by register-ord.allstarlink.org
> 
> This will show you the age and what nodes server it was generated on.
> 
> -- 
> Bryan Fields
> 
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.