[App_rpt-users] DTMF issue on DMR

[Skyler F]

Never mind sorry didn’t read your whole email.

On DMR, (from what I know) I believe DTMF is encoded into a bit stream and
then AMBE decides that bit stream back into tones.

Maybe the Chinese did something different with their bits that your
receiver doesent understand?

On Mon, May 6, 2019 at 7:49 AM Skyler F <electricity440 at gmail.com> wrote:

> Does the D878 generate tones that sound ok on another DMR radio?
>
> On Mon, May 6, 2019 at 7:47 AM kc9mnl at gmail.com <kc9mnl at gmail.com> wrote:
>
>> It decodes with other radios but not this d878.
>>
>>
>> -------- Original Message --------
>> Subject: Re: [App_rpt-users] DTMF issue on DMR
>> From: Skyler F
>> To: Users of Asterisk app_rpt
>> CC:
>>
>>
>> See if asterisk is decoding any of the touchtones in the cli. “asterisk
>> -vvvvvvvvr” then type the tones and see if anything is happening
>>
>>
>> On Sat, May 4, 2019 at 12:52 PM kc9mnl at gmail.com <kc9mnl at gmail.com>
>> wrote:
>>
>>> Hello all,
>>> I am running an Allstar node that is linked directly via 2 URIs to a DMR cbridge using an ambe device in the cbridge to en/decode audio. The node has been operating normal but recently I purchased a new radio, an Anytone D878uv. When I transmit DTMF codes, from the D878, to control the node it won't decode it. When I listen to the talkgroup using another radio the DTMF sounds normal. When I use other radios DTMF is decoded properly. Any suggestions?73,
>>> Steve
>>> KC9MNL
>>> Node #27575
>>> Sorry if this is a duplicate post. I'm having trouble with my phone.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20190506/1c4a38eb/attachment.html>