[FSG-public] Tampa Update
Bryan Fields
bryan at flscg.org
Sun Jul 10 13:50:29 EDT 2016
On 7/9/16 8:24 PM, Bryan Fields wrote:
> I'll get the radios configured later if I'm feeling up to it. I think we're
> all worn out from today.
Radios are configured.
You should have bridged connection and get an IP from 44.98.248.0/27
A basic client config is below.
> Client config
> /ip dhcp-server
> remove [find]
> /ip dhcp-server network
> remove [find]
> /ip dns
> set allow-remote-requests=no
> /interface wireless channels
> add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-5 width=5
> add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-5 width=5
> add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-5 width=5
> add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" frequency=5920 list=HamWAN name=Sector1-10 width=10
> add band=5ghz-onlyn comment="Cell sites radiate this at 120 degrees (south-east)" frequency=5900 list=HamWAN name=Sector2-10 width=10
> add band=5ghz-onlyn comment="Cell sites radiate this at 240 degrees (south-west)" frequency=5880 list=HamWAN name=Sector3-10 width=10
> /interface wireless
> set 0 radio-name="W9CR/ST-PETERSBURG-PORTABLE"
> /interface wireless
> set 0 disabled=no frequency-mode=superchannel scan-list=HamWAN ssid=HamWAN wireless-protocol=nv2
> /ip dhcp-client
> add add-default-route=yes dhcp-options=hostname,clientid disabled=no interface=wlan1
I've not tested any of this, and as of now the radio will get an IP in
44.98.248.0/27 as well. I'd like to figure out how to get the radio to get an
IP out of the vlan 30 mgmt space at 44.98.249.1/27, but thats for later.
I'm going to see if I can test any of it later from downtown St Pete.
73's
--
Bryan Fields, W9CR
Florida Simulcast Group, Inc.
More information about the FSG-public
mailing list