Post your dmrlink.cfg On 04/10/2017 07:26 PM, Peter wrote:
################################################ # ambe_audio configuration file. ################################################
# DEFAULTS - General settings. These values are # inherited in each subsequent section (defined by section value).
[DEFAULTS] debug = False # Debug output for each VOICE frame outToFile = False # Write each AMBE frame to a file called ambe.bin outToUDP = True # Send each AMBE frame to the _sock object (turn on/off DMRGateway operation) gateway = 127.0.0.1 # IP address of DMRGateway app toGatewayPort = 31000 # Port DMRGateway is listening on for AMBE frames to decode remoteControlPort = 31002 # Port that ambe_audio is listening on for remote control commands fromGatewayPort = 31003 # Port to listen on for AMBE frames to transmit to all peers gatewayDmrId = 2342425 # id to use when transmitting from the gateway tgFilter = 23525 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway txTg = 23525 # TG to use for all frames received from DMRGateway -> IPSC txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC # # The section setting defines the current section to use. By default, the ‘ENABLED’ section in dmrlink.cfg is used. # Any values in the named section override the values from the DEFAULTS section. For example, if the BM section # has a value for gatewayDmrId it would override the value above. Only one section should be set here. Think # of this as an easy way to switch between several different configurations with a single line. # section = BM # Use BM section values # section = Sandbox # Use SANDBOX section values
[BM] # BrandMeister tgFilter = 23525 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway txTg = 23525 # TG to use for all frames received from DMRGateway -> IPSC txTs = 1 # Slot to use for frames received from DMRGateway -> IPSC
On 11/04/2017 00:22, Steve Zingman wrote:
Post your ambe_audio.cfg
On 04/10/2017 07:20 PM, Peter wrote:
Been doing a bit more experimenting with this, something weird is going on.
My source ID is 2342425 and the destination ID should be TG234525
But, see attached, any ideas?
Peter
On 06/04/2017 13:23, Steve Zingman wrote:
As peter has mentioned, Mike and I have been working on updating ambe_audio to work with the current version of DMRlink. Right now traffic from ASL is passing to DMR without error. Mike has a capture of the latest error when passing traffic from DMR to analog. Due to the nature of DMRlink, we have to squash a bug and move on to the next. This does take time. Stay tuned.
73, Steve N4IRS
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital