OK, We need to see if the kernel is getting upgraded. The headers have to match. On 01/30/2016 10:59 PM, Michael J. Wolthuis wrote:
Steve, That’s what I started with – I am certain, but will start again fresh tomorrow with a new card.
Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org <mailto:allstar-digital-bounces@lists.keekles.org>> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar>
Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns:
You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate.
/srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic