My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you. Steve On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2. The allstar install scripts I’m using are yours also. /srv/scripts/build_dahdi.sh This command returns: You do not appear to have the sources for the 4.1.16+ kernel installed. This appears to finish fine, but no Asterisk binary that I can locate. /srv/scripts/build_asterisk.sh So, struggling a bit on the Pi1. Thanks for any pointers, Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you. Steve On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote: My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar> Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip> On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns:
You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate.
/srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org <mailto:allstar-digital-bounces@lists.keekles.org>> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Steve, That’s what I started with – I am certain, but will start again fresh tomorrow with a new card. Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar> Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip> On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote: Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2. The allstar install scripts I’m using are yours also. /srv/scripts/build_dahdi.sh This command returns: You do not appear to have the sources for the 4.1.16+ kernel installed. This appears to finish fine, but no Asterisk binary that I can locate. /srv/scripts/build_asterisk.sh So, struggling a bit on the Pi1. Thanks for any pointers, Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you. Steve On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote: My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
OK, We need to see if the kernel is getting upgraded. The headers have to match. On 01/30/2016 10:59 PM, Michael J. Wolthuis wrote:
Steve, That’s what I started with – I am certain, but will start again fresh tomorrow with a new card.
Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org <mailto:allstar-digital-bounces@lists.keekles.org>> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar>
Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns:
You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate.
/srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
I did run your upgrade scripts, wonder if that is the step I should have skipped. Will start over tomorrow. Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar> Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip> On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote: Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2. The allstar install scripts I’m using are yours also. /srv/scripts/build_dahdi.sh This command returns: You do not appear to have the sources for the 4.1.16+ kernel installed. This appears to finish fine, but no Asterisk binary that I can locate. /srv/scripts/build_asterisk.sh So, struggling a bit on the Pi1. Thanks for any pointers, Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you. Steve On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote: My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Possible. I'll get with you tomorrow. On 01/30/2016 11:00 PM, Michael J. Wolthuis wrote:
I did run your upgrade scripts, wonder if that is the step I should have skipped.
Will start over tomorrow.
Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org <mailto:allstar-digital-bounces@lists.keekles.org>> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar>
Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns:
You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate.
/srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Are you planning to have a local sound device connected to the RPi1? On 01/30/2016 11:00 PM, Michael J. Wolthuis wrote:
I did run your upgrade scripts, wonder if that is the step I should have skipped.
Will start over tomorrow.
Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org <mailto:allstar-digital-bounces@lists.keekles.org>> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar>
Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote:
Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns:
You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate.
/srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org <mailto:allstar-digital@lists.keekles.org>> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
No was not planning on it. This node is purely for DMRGateway Sent from my iPad
On Jan 30, 2016, at 11:01 PM, Steve Zingman <szingman@msgstor.com> wrote:
Are you planning to have a local sound device connected to the RPi1?
On 01/30/2016 11:00 PM, Michael J. Wolthuis wrote: I did run your upgrade scripts, wonder if that is the step I should have skipped.
Will start over tomorrow.
Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:52 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt
You should be using the RPi1 image pointed to on the front page. <https://github.com/N4IRS/AllStar>
Here is a link to the image: <http://downloads.raspberrypi.org/raspbian/images/raspbian-2014-12-25/2014-12-24-wheezy-raspbian.zip>
On 01/30/2016 10:49 PM, Michael J. Wolthuis wrote: Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2.
The allstar install scripts I’m using are yours also.
/srv/scripts/build_dahdi.sh This command returns: You do not appear to have the sources for the 4.1.16+ kernel installed.
This appears to finish fine, but no Asterisk binary that I can locate. /srv/scripts/build_asterisk.sh
So, struggling a bit on the Pi1.
Thanks for any pointers, Mike
From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt
ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you.
Steve
On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote: My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
What is the output if you run DMRGateway in the foreground? On Saturday, January 30, 2016, Michael J. Wolthuis <wolthuis@gmail.com> wrote:
My first attempt to start up /usr/local/bin/DMRGateway &
I get Segmentation Fault immediately.
Anyone else had that issue?
I have DMRLink working as a peer, connected to our C-Bridge.
I have AMBEserverGPIO working and listening on UDP.
Do not yet have Asterisk started, is that the issue?
Mike kb8zgl
Mike, It just immediately segmentation faults. Note, I am doing this on Raspbian on PI1. Also note, Asterisk is not running yet, not sure if it is looking for it.. Just finalizing the build of that with Steve’s help this morning. Mike kb8zgl From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Mike Zingman <mike.zingman@gmail.com> Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Sunday, January 31, 2016 at 9:29 AM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt What is the output if you run DMRGateway in the foreground? On Saturday, January 30, 2016, Michael J. Wolthuis <wolthuis@gmail.com> wrote: My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
participants (4)
-
Michael J. Wolthuis -
Michael Wolthuis
-
Mike Zingman -
Steve Zingman