I found a sample called playback_config_SAMPLE.py in /opt/dmrlink/samples. Does that need to be edited and placed in /opt/dmrlink/gateway? David On Fri, Dec 11, 2015 at 11:45 AM, Robert Newberry <N1XBM@amsat.org> wrote:
I have my repeater on a dummy load and the RPI2 and my laptop all on a unmanaged switch for testing.
On dmrlink.cfg
My thought was to make the RPI2 running dmrlink the master and my repeater as the peer. Is this possible? I am unsure how I would do that. My guess is I would put the IP of the RPI2 in the dmrlink.cfg
Steve, had mentioned get my repeater parroting on a tg.
So I looked at playback.py I see tg ID for a group call is 12345 on ts2 and private is the same except ts 1 and 2. So if I set my radio up accordingly. I should parrot on those IDs.
What other files do I need to edit?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital