So I'm following the instructions from a previous email. I executed the cp command from /srv cp DMRGateway.armv7 DMRGateway I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway Am I just in the wrong directory? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
Yes Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote: So I'm following the instructions from a previous email. I executed the cp command from /srv cp DMRGateway.armv7 DMRGateway I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway Am I just in the wrong directory? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658 _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
I checked the notes. Above the move of the ini is a cd DMRGateway Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote: So I'm following the instructions from a previous email. I executed the cp command from /srv cp DMRGateway.armv7 DMRGateway I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway Am I just in the wrong directory? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658 _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get. root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated. The second issuse about can not import subscriber_info, I am not sure where to look for that. On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
netstat-unap Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote: So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get. root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated. The second issuse about can not import subscriber_info, I am not sure where to look for that. On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway ambe_audio.py will not run I still get this error. File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info I must be missing a file? by my own screwing up of coarse! On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Check for subscriber_ids.csv in /opt/darling Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote: OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway ambe_audio.py will not run I still get this error. File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info I must be missing a file? by my own screwing up of coarse! On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable. On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Try to copy it to /opt/dmrlink/ambe_audio Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote: I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable. On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue? File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
What are the permissions on the file? Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote: Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue? File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv So the owner has read and write, and everyone else just write. On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
And you have all the csv files in /opt/dmrlink? Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org> wrote: root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv So the owner has read and write, and everyone else just write. On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
I have, peer, subscriber, talkgroup On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman <szingman@msgstor.com> wrote:
And you have all the csv files in /opt/dmrlink?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org> wrote:
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
I'll have to troubleshoot when I get home Sent via smoke signal (AT&T 4G LTE) On Feb 28, 2016, at 1:38 PM, Robert Newberry <N1XBM@amsat.org> wrote: I have, peer, subscriber, talkgroup On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman <szingman@msgstor.com> wrote:
And you have all the csv files in /opt/dmrlink?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org> wrote:
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:
So I'm following the instructions from a previous email.
I executed the cp command from /srv
cp DMRGateway.armv7 DMRGateway
I get no such file or directory. I can however see DMRGateway.armv7 in /srv/DMRGateway
Am I just in the wrong directory?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Its OK Steve, appreciate your efforts as always. I'll work around your schedule. I will be around all day, and leaving in the evening for dinner at my parents Usually home be 7pm. On Sun, Feb 28, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
I'll have to troubleshoot when I get home
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I have, peer, subscriber, talkgroup
On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman <szingman@msgstor.com> wrote:
And you have all the csv files in /opt/dmrlink?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org> wrote:
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:
So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.
root@repeater:/etc# Traceback (most recent call last): File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP p.startListening() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening self._bindSocket() File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket raise error.CannotListenError(self.interface, self.port, le) twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use. Traceback (most recent call last): File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.
The second issuse about can not import subscriber_info, I am not sure where to look for that.
On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com > wrote:
> I checked the notes. Above the move of the ini is a cd DMRGateway > > Sent via smoke signal (AT&T 4G LTE) > > On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> > wrote: > > So I'm following the instructions from a previous email. > > I executed the cp command from /srv > > cp DMRGateway.armv7 DMRGateway > > I get no such file or directory. I can however see DMRGateway.armv7 > in > /srv/DMRGateway > > Am I just in the wrong directory? > > N1XBM > Apparare Scientor > Paratus Communicare > Allstar Node # 27086, 41540, 41812, 42086, 42658 > > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital@lists.keekles.org > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital@lists.keekles.org > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Overwrite all copies of dmrlink.py in /opt/dmrlink/ and below with the new dmrlink.py in /srv/DMRlink On 02/28/2016 01:42 PM, Robert Newberry wrote:
Its OK Steve, appreciate your efforts as always. I'll work around your schedule. I will be around all day, and leaving in the evening for dinner at my parents Usually home be 7pm.
On Sun, Feb 28, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
I'll have to troubleshoot when I get home
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:38 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
I have, peer, subscriber, talkgroup
On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
And you have all the csv files in /opt/dmrlink?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
OK resolved one issue with 0.0.0.0:52307 <http://0.0.0.0:52307> I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 <http://0.0.0.0:34001> 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 <http://127.0.0.1:32001> 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 <http://0.0.0.0:31000> 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 <http://0.0.0.0:50001> 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 <http://0.0.0.0:2460> 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 <http://0.0.0.0:4569> 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 <http://0.0.0.0:52307> 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 <http://0.0.0.0:53900> 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 <http://0.0.0.0:49823> 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
netstat-unap
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
> So I noticed that ambe_audio.py and > bridge.py were not comming up at bootup. > I ran ./rc.local and saw it was > permission denied. I corrected that. > This is what I get. > > root@repeater:/etc# Traceback (most > recent call last): > File "/opt/dmrlink/bridge/bridge.py", > line 273, in <module> > reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], > networks[ipsc_network], > interface=NETWORK[ipsc_network]['LOCAL']['IP']) > File > "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", > line 374, in listenUDP > p.startListening() > File > "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", > line 175, in startListening > self._bindSocket() > File > "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", > line 195, in _bindSocket > raise > error.CannotListenError(self.interface, > self.port, le) > twisted.internet.error.CannotListenError: Couldn't > listen on 0.0.0.0:52307 > <http://0.0.0.0:52307>: [Errno 98] > Address already in use. > Traceback (most recent call last): > File > "/opt/dmrlink/ambe_audio/ambe_audio.py", > line 19, in <module> > from dmrlink import IPSC, NETWORK, > networks, logger, int_id, hex_str_3, > hex_str_4, get_info, talkgroup_ids, > peer_ids, PATH, get_subscriber_info, > reread_subscribers > ImportError: cannot import name > get_subscriber_info > > > So I think the first problem where it > says it cant listen on 0.0.0.0:52307 > <http://0.0.0.0:52307> that has to do > with my peer connection to brandmiester. > I've looked at dmrlink.cfg in both > ambe_audio and bridge directories. I can > not see where that port is duplicated. > > The second issuse about can not import > subscriber_info, I am not sure where to > look for that. > > On Sun, Feb 28, 2016 at 10:57 AM, Steve > Zingman <szingman@msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > I checked the notes. Above the move > of the ini is a cd DMRGateway > > Sent via smoke signal (AT&T 4G LTE) > > On Feb 28, 2016, at 10:49 AM, Robert > Newberry <N1XBM@amsat.org > <mailto:N1XBM@amsat.org>> wrote: > >> So I'm following the instructions >> from a previous email. >> >> I executed the cp command from /srv >> >> cp DMRGateway.armv7 DMRGateway >> >> I get no such file or directory. I >> can however see DMRGateway.armv7 in >> /srv/DMRGateway >> >> Am I just in the wrong directory? >> >> N1XBM >> Apparare Scientor >> Paratus Communicare >> Allstar Node # 27086, 41540, 41812, >> 42086, 42658 >> >> _______________________________________________ >> Allstar-Digital mailing list >> Allstar-Digital@lists.keekles.org >> <mailto:Allstar-Digital@lists.keekles.org> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital@lists.keekles.org > <mailto:Allstar-Digital@lists.keekles.org> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital@lists.keekles.org > <mailto:Allstar-Digital@lists.keekles.org> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Steve, that appeared to fix it, I got a few things to tweak but it looks close, Im about to head out and will have to get back at it later. root@repeater:/etc# ./rc.local DMRLink Gateway Setting [GENERAL] outputAudioDevice -> /dev/null Setting [GENERAL] inputAudioDevice -> /dev/null Setting [GENERAL] decoderFallBack -> false Setting [GENERAL] useMicrophone -> false Setting [GENERAL] useVox -> true Setting [GENERAL] voxDecay -> 2 Setting [GENERAL] voxTrigger -> 200 Setting [AMBE_AUDIO] server -> 127.0.0.1 Setting [AMBE_AUDIO] fromDMRPort -> 31000 Setting [AMBE_AUDIO] toDMRPort -> 31003 Setting [USRP] server -> 127.0.0.1 Setting [USRP] toASLPort -> 32001 Setting [USRP] fromASLPort -> 34001 Setting [USRP] aslAudio -> AUDIO_USE_AGC Setting [USRP] agcGain -> -20 Setting [USRP] dmrAudio -> AUDIO_USE_BPF Setting [USRP] dmrGain -> 0.35 Setting [DV3000] server -> 127.0.0.1 Setting [DV3000] port -> 2460 ioctl reset error ioctl speed error ioctl stereo error ioctl setfmt error Audio In/Out Device: /dev/null Open UDP listener on 127.0.0.1:31000 Open USRP on 127.0.0.1:32001 Begin DV3000 decode Using hardware AMBE decoder Starting DMRLink --> USRP thread Open UDP listener on 127.0.0.1:34001 Starting USRP --> DMRLink thread root@repeater:/etc# Subscriber file has been updated. 24491 IDs imported Subscriber file has been updated. 24491 IDs imported INFO DMRlink 'ambe_audio.py' (c) 2015 N0MJS & the K0USY Group - SYSTEM STARTING... INFO (AMBE_PEER) IPSC Instance Created: 12345, 192.168.0.203:52345 INFO section = AMBE_PEER ERROR Section AMBE_PEER was not found, using DEFAULTS INFO debug = False INFO outToFile = False INFO outToUDP = True INFO gateway = 127.0.0.1 INFO toGatewayPort = 31000 INFO remoteControlPort = 31002 INFO fromGatewayPort = 31003 INFO gatewayDmrId = 0 INFO tgFilter = 9 INFO txTg = 9 INFO txTs = 2 INFO DMRLink ambe server Error: gatewayDmrId must be set (greater than zero) On Sun, Feb 28, 2016 at 3:57 PM, Steve Zingman <szingman@msgstor.com> wrote:
Overwrite all copies of dmrlink.py in /opt/dmrlink/ and below with the new dmrlink.py in /srv/DMRlink
On 02/28/2016 01:42 PM, Robert Newberry wrote:
Its OK Steve, appreciate your efforts as always. I'll work around your schedule. I will be around all day, and leaving in the evening for dinner at my parents Usually home be 7pm.
On Sun, Feb 28, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
I'll have to troubleshoot when I get home
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:38 PM, Robert Newberry < <N1XBM@amsat.org> N1XBM@amsat.org> wrote:
I have, peer, subscriber, talkgroup
On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
And you have all the csv files in /opt/dmrlink?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:22 PM, Robert Newberry < <N1XBM@amsat.org> N1XBM@amsat.org> wrote:
root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv -rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv -rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv
So the owner has read and write, and everyone else just write.
On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
What are the permissions on the file?
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 1:14 PM, Robert Newberry < <N1XBM@amsat.org> N1XBM@amsat.org> wrote:
Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:59 PM, Robert Newberry < <N1XBM@amsat.org> N1XBM@amsat.org> wrote:
I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.
On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman < <szingman@msgstor.com>szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling
Sent via smoke signal (AT&T 4G LTE)
On Feb 28, 2016, at 12:48 PM, Robert Newberry < <N1XBM@amsat.org> N1XBM@amsat.org> wrote:
OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap
root@repeater:~# netstat -unap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name udp 0 0 0.0.0.0:34001 0.0.0.0:* 279/DMRGateway udp 0 0 127.0.0.1:32001 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:31000 0.0.0.0:* 279/DMRGateway udp 0 0 0.0.0.0:50001 0.0.0.0:* 234/python udp 0 0 0.0.0.0:2460 0.0.0.0:* 221/AMBEserverGPIO udp 0 0 0.0.0.0:4569 0.0.0.0:* 277/asterisk udp 0 0 0.0.0.0:52307 0.0.0.0:* 234/python udp 0 0 0.0.0.0:53900 0.0.0.0:* 234/python udp 0 0 0.0.0.0:49823 0.0.0.0:* 279/DMRGateway
ambe_audio.py will not run I still get this error.
File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers ImportError: cannot import name get_subscriber_info
I must be missing a file? by my own screwing up of coarse!
On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman < <szingman@msgstor.com>szingman@msgstor.com> wrote:
> netstat-unap > > Sent via smoke signal (AT&T 4G LTE) > > On Feb 28, 2016, at 12:38 PM, Robert Newberry < <N1XBM@amsat.org> > N1XBM@amsat.org> wrote: > > So I noticed that ambe_audio.py and bridge.py were not comming up at > bootup. I ran ./rc.local and saw it was permission denied. I corrected > that. This is what I get. > > root@repeater:/etc# Traceback (most recent call last): > File "/opt/dmrlink/bridge/bridge.py", line 273, in <module> > reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], > networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP']) > File > "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, > in listenUDP > p.startListening() > File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", > line 175, in startListening > self._bindSocket() > File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", > line 195, in _bindSocket > raise error.CannotListenError(self.interface, self.port, le) > twisted.internet.error.CannotListenError: Couldn't listen on > 0.0.0.0:52307: [Errno 98] Address already in use. > Traceback (most recent call last): > File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module> > from dmrlink import IPSC, NETWORK, networks, logger, int_id, > hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, > get_subscriber_info, reread_subscribers > ImportError: cannot import name get_subscriber_info > > > So I think the first problem where it says it cant listen on > 0.0.0.0:52307 that has to do with my peer connection to > brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge > directories. I can not see where that port is duplicated. > > The second issuse about can not import subscriber_info, I am not > sure where to look for that. > > On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman < > <szingman@msgstor.com>szingman@msgstor.com> wrote: > >> I checked the notes. Above the move of the ini is a cd DMRGateway >> >> Sent via smoke signal (AT&T 4G LTE) >> >> On Feb 28, 2016, at 10:49 AM, Robert Newberry < <N1XBM@amsat.org> >> N1XBM@amsat.org> wrote: >> >> So I'm following the instructions from a previous email. >> >> I executed the cp command from /srv >> >> cp DMRGateway.armv7 DMRGateway >> >> I get no such file or directory. I can however see DMRGateway.armv7 >> in >> /srv/DMRGateway >> >> Am I just in the wrong directory? >> >> N1XBM >> Apparare Scientor >> Paratus Communicare >> Allstar Node # 27086, 41540, 41812, 42086, 42658 >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> <Allstar-Digital@lists.keekles.org> >> Allstar-Digital@lists.keekles.org >> <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> <Allstar-Digital@lists.keekles.org> >> Allstar-Digital@lists.keekles.org >> <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital >> >> > _______________________________________________ > Allstar-Digital mailing list > <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org > <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > > _______________________________________________ > Allstar-Digital mailing list > <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org > <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > _______________________________________________ Allstar-Digital mailing list <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list <Allstar-Digital@lists.keekles.org>Allstar-Digital@lists.keekles.org <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing listAllstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
participants (2)
-
Robert Newberry -
Steve Zingman