I decided to change the subject to more accurately reflect what we're talking about. I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 reside at the site with the repeater. I'd like to set something like this up at home. I have a few questions. Can I just get another pi and install DMRlink and DMRGateway and point DMRGateway.ini to my remote site via IP? Or would I need to also have a DV3000 installed at home as well? I assume the cheap little USB fobs we use for ASL would be OK? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
Yes, you can point a Pi at your bridge. Yes, you will need another DV3000. Yes, a cheap sound fob would work. On 5/11/2016 11:51 AM, Robert Newberry wrote:
I decided to change the subject to more accurately reflect what we're talking about.
I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 reside at the site with the repeater. I'd like to set something like this up at home. I have a few questions.
Can I just get another pi and install DMRlink and DMRGateway and point DMRGateway.ini to my remote site via IP?
Or would I need to also have a DV3000 installed at home as well?
I assume the cheap little USB fobs we use for ASL would be OK?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Robert, There is no advantage to what you have proposed. ASL as input to DMRGateway vs local microphone input to DMRGateway is the same. So, just use ASL to link your local node at home to the Pi at your repeater site. Mike On Wed, May 11, 2016 at 11:51 AM, Robert Newberry <N1XBM@amsat.org> wrote:
I decided to change the subject to more accurately reflect what we're talking about.
I took a look at /etc/DMRGateway.ini. Currently my RPI2 and DV3000 reside at the site with the repeater. I'd like to set something like this up at home. I have a few questions.
Can I just get another pi and install DMRlink and DMRGateway and point DMRGateway.ini to my remote site via IP?
Or would I need to also have a DV3000 installed at home as well?
I assume the cheap little USB fobs we use for ASL would be OK?
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Mike, You are right, and I currently do that now. I guess I thought that there may be a pathway to steer to the other talkgroups easily on my repeater in the future. Currently I use a TG that is local to my repeater and goes out to my network of ASL repeaters. If I really wanted to do I could change that BM TG. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
So, if you want TG agility, use the ambe_audio remote control commands. That is what the GUI uses. You can either ssh into your node to issue them or use DTMF commands to do the same. On Wed, May 11, 2016 at 12:07 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Mike,
You are right, and I currently do that now. I guess I thought that there may be a pathway to steer to the other talkgroups easily on my repeater in the future.
Currently I use a TG that is local to my repeater and goes out to my network of ASL repeaters.
If I really wanted to do I could change that BM TG.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Wow, that appears to be the ticket! I had no idea there were ambe_audio remote control commands. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com On May 11, 2016 12:10 PM, "Mike Zingman" <mike.zingman@gmail.com> wrote:
So, if you want TG agility, use the ambe_audio remote control commands. That is what the GUI uses. You can either ssh into your node to issue them or use DTMF commands to do the same.
On Wed, May 11, 2016 at 12:07 PM, Robert Newberry <N1XBM@amsat.org> wrote:
Mike,
You are right, and I currently do that now. I guess I thought that there may be a pathway to steer to the other talkgroups easily on my repeater in the future.
Currently I use a TG that is local to my repeater and goes out to my network of ASL repeaters.
If I really wanted to do I could change that BM TG.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
standby.... notes to follow On 5/11/2016 12:32 PM, Robert Newberry wrote:
Wow, that appears to be the ticket! I had no idea there were ambe_audio remote control commands.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
On May 11, 2016 12:10 PM, "Mike Zingman" <mike.zingman@gmail.com <mailto:mike.zingman@gmail.com>> wrote:
So, if you want TG agility, use the ambe_audio remote control commands. That is what the GUI uses. You can either ssh into your node to issue them or use DTMF commands to do the same.
On Wed, May 11, 2016 at 12:07 PM, Robert Newberry <N1XBM@amsat.org <mailto:N1XBM@amsat.org>> wrote:
Mike,
You are right, and I currently do that now. I guess I thought that there may be a pathway to steer to the other talkgroups easily on my repeater in the future.
Currently I use a TG that is local to my repeater and goes out to my network of ASL repeaters.
If I really wanted to do I could change that BM TG.
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
participants (3)
-
Mike Zingman -
Robert Newberry -
Steve Zingman