Hi to everyone . My DMR Gateway software suite is installed and all the testing in the procedure are OK.. I am connecting to Brandmeister 3108 port 55001 TG 3027 . All response are OK . The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my AST USRP 34001 When I do PTT and test audio from Iaxrpt connected to my node . The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated . My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release My test MMDVM repeater opened on TG 3027 receives a PTT from network. BUT No audio ( only faint high frequency buzz ) No activity on Hoseline even if Last Heard is being updated..... Any hints as how to test the ThumbDV output ??? Have been experimenting with the outputAudioDevice in DMRGateway.ini without success..... Deffective ThumbDV ?????? . How can I make shure ???? Also I am hearing some audio out on AST node that is not coming from TG3027 ?????? My entry in ambe_audio.cfg is TGfilter = 3027,4327 Loaded the system twice from scratch and ..... Same..... Thanks for any advice Richard VE2DJE Provenance : Courrier pour Windows 10
Have you been setup on the server for smart Ptt? Corey n3fe Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com> <ve2dje@gmail.com> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated . My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
I am not very hot in Brandmeister opération and configuration. .. My DMRlink can log on server 3108.on port 55001. The Last Heard windows shows every transmission I make on TG 3027. Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish .... Is there something more that needs to be done on the server.????? I asking because I don't have a clue. I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt port. Waiting for his answer.... . Thanks for your help..... Richard Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net> a écrit :
Have you been setup on the server for smart Ptt?
Corey n3fe
Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com> <ve2dje@gmail.com> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my
AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released
My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Richard, Take a look at <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt> Pay attention to the testing of communications with the DV3000 73, Steve N4IRS On 04/12/2017 11:33 PM, Richard Aubin wrote:
I am not very hot in Brandmeister opération and configuration. .. My DMRlink can log on server 3108.on port 55001. The Last Heard windows shows every transmission I make on TG 3027. Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish .... Is there something more that needs to be done on the server.????? I asking because I don't have a clue. I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt port. Waiting for his answer.... . Thanks for your help.....
Richard
Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net <mailto:n3fe@repeater.net>> a écrit :
Have you been setup on the server for smart Ptt?
Corey n3fe
Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com <mailto:ve2dje@gmail.com>> <ve2dje@gmail.com <mailto:ve2dje@gmail.com>> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my
AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released
My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital <http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Steve : I was already using the procedure last version . reinstalled and checked all twice . ThumbDV responds normally to test and also in DMRGateway screen…. Same result ( NO AUDIO) on DIAL_RAT_RC1 or on Raspbian Jessie ( I figured out my first problem with Jessie ) Corey : I will send you a copy of your email to Ben VE2VB so he can contact you . BM server 3021 does not answers back to my Peer connection on port 55001 . BM 3108 does respond properly with same config…. Could you suggest Ben which TG I should use for testing the setup ????? Questions to help me troubleshoot : DMRGateway..ini entry for outputAudioDevice = /dev/null Will a suitable audio device configured in DMRGateway.ini could confirm the quality of the audio sent from AST Chan_USRP to DMRGateway ???? Any clue on how to set up audio devices on DIAL ????? Will try on Raspbian Jessie…. My mmdvm repeater is also hooked to BM3108 on port 62031 … Could there be any conflict running 2 apps to a BM server from the same public IP ????? ( 2 different Rpi3 inside) Is there another TG that is known to work properly on BM3108 with DMRGateway ?????? Can you confirm that Hoseline is working properly with SmartPtt apps ????? Here is a file of all the apps screen startup upu to PTT release + my .ini … Is there a audio test that can be done using Windows or Linux for ThumbDV ( Kind of a Loopback test ???) Thanks Richard Provenance : Courrier pour Windows 10 De : Steve Zingman Envoyé le :jeudi 13 avril 2017 06:15 À : Digital linking using Asterisk and app_rpt Objet :Re: [Allstar Digital] DMRGateway testing Richard, Take a look at <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt> Pay attention to the testing of communications with the DV3000 73, Steve N4IRS On 04/12/2017 11:33 PM, Richard Aubin wrote: I am not very hot in Brandmeister opération and configuration. .. My DMRlink can log on server 3108.on port 55001. The Last Heard windows shows every transmission I make on TG 3027. Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish .... Is there something more that needs to be done on the server.????? I asking because I don't have a clue. I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt port. Waiting for his answer.... . Thanks for your help..... Richard Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net> a écrit : Have you been setup on the server for smart Ptt? Corey n3fe Sent from my iPhone On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com> <ve2dje@gmail.com> wrote: Hi to everyone . My DMR Gateway software suite is installed and all the testing in the procedure are OK.. I am connecting to Brandmeister 3108 port 55001 TG 3027 . All response are OK . The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my AST USRP 34001 When I do PTT and test audio from Iaxrpt connected to my node . The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated . My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release My test MMDVM repeater opened on TG 3027 receives a PTT from network. BUT No audio ( only faint high frequency buzz ) No activity on Hoseline even if Last Heard is being updated..... Any hints as how to test the ThumbDV output ??? Have been experimenting with the outputAudioDevice in DMRGateway.ini without success..... Deffective ThumbDV ?????? . How can I make shure ???? Also I am hearing some audio out on AST node that is not coming from TG3027 ?????? My entry in ambe_audio.cfg is TGfilter = 3027,4327 Loaded the system twice from scratch and ..... Same..... Thanks for any advice Richard VE2DJE Provenance : Courrier pour Windows 10 _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Richard, how to set up audio devices on DIAL ????? Will try on Raspbian Jessie…. DIAL_RAT_RC1 is Raspbian Jessie. DMRGateway..ini entry for outputAudioDevice = /dev/null Will a suitable audio device configured in DMRGateway.ini could confirm the quality of the audio sent from AST Chan_USRP to DMRGateway ???? Any clue on how to set up audio devices on DIAL ????? Will try on R This is not used for the Gateway. My mmdvm repeater is also hooked to BM3108 on port 62031 … Could there be any conflict running 2 apps to a BM server from the same public IP ????? ( 2 different Rpi3 inside) No there should not be a issue. Is there another TG that is known to work properly on BM3108 with DMRGateway? DMRGaateway does not care what TG you use. Can you confirm that Hoseline is working properly with SmartPtt apps ????? Yes, I can confire hoseline works properly. Is there a audio test that can be done using Windows or Linux for ThumbDV ( Kind of a Loopback test ???) Not that I know of. 73, Steve N4IRS On 04/13/2017 11:05 PM, ve2dje@gmail.com wrote:
Steve : I was already using the procedure last version . reinstalled and checked all twice .
ThumbDV responds normally to test and also in DMRGateway screen….
Same result ( NO AUDIO) on DIAL_RAT_RC1 or on Raspbian Jessie
( I figured out my first problem with Jessie )
Corey : I will send you a copy of your email to Ben VE2VB so he can contact you . BM server 3021 does not answers back to my Peer connection on port 55001 . BM 3108 does respond properly with same config….
Could you suggest Ben which TG I should use for testing the setup ?????
Questions to help me troubleshoot :
DMRGateway..ini entry for outputAudioDevice = /dev/null Will a suitable audio device configured in DMRGateway.ini could confirm the quality of the audio sent from AST Chan_USRP to DMRGateway ???? Any clue on how to set up audio devices on DIAL ????? Will try on Raspbian Jessie….
My mmdvm repeater is also hooked to BM3108 on port 62031 … Could there be any conflict running 2 apps to a BM server from the same public IP ????? ( 2 different Rpi3 inside)
Is there another TG that is known to work properly on BM3108 with DMRGateway ??????
Can you confirm that Hoseline is working properly with SmartPtt apps ?????
Here is a file of all the apps screen startup upu to PTT release + my .ini …
Is there a audio test that can be done using Windows or Linux for ThumbDV ( Kind of a Loopback test ???)
Thanks
Richard
Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
*De : *Steve Zingman <mailto:szingman@msgstor.com> *Envoyé le :*jeudi 13 avril 2017 06:15 *À : *Digital linking using Asterisk and app_rpt <mailto:allstar-digital@lists.keekles.org> *Objet :*Re: [Allstar Digital] DMRGateway testing
Richard, Take a look at <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt> <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt> Pay attention to the testing of communications with the DV3000
73, Steve N4IRS
On 04/12/2017 11:33 PM, Richard Aubin wrote:
I am not very hot in Brandmeister opération and configuration. ..
My DMRlink can log on server 3108.on port 55001.
The Last Heard windows shows every transmission I make on TG 3027.
Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish ....
Is there something more that needs to be done on the server.?????
I asking because I don't have a clue.
I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt
port. Waiting for his answer....
.
Thanks for your help.....
Richard
Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net <mailto:n3fe@repeater.net>> a écrit :
Have you been setup on the server for smart Ptt?
Corey n3fe
Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com <mailto:ve2dje@gmail.com>> <ve2dje@gmail.com <mailto:ve2dje@gmail.com>> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my
AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released
My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org <mailto:Allstar-Digital@lists.keekles.org>
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
If the admin of that master needs help configuring smartptt have him contact me directly. Sent from my iPhone
On Apr 12, 2017, at 11:33 PM, Richard Aubin <ve2dje@gmail.com> wrote:
I am not very hot in Brandmeister opération and configuration. .. My DMRlink can log on server 3108.on port 55001. The Last Heard windows shows every transmission I make on TG 3027. Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish .... Is there something more that needs to be done on the server.????? I asking because I don't have a clue. I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt port. Waiting for his answer.... . Thanks for your help.....
Richard
Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net> a écrit :
Have you been setup on the server for smart Ptt?
Corey n3fe
Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com> <ve2dje@gmail.com> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my
AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released
My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
Are you sure iaxrpt is sending good audio into the allstar network? Did you hear it on another mode? On Thu, Apr 13, 2017 at 6:21 AM Corey Dean <n3fe@repeater.net> wrote:
If the admin of that master needs help configuring smartptt have him contact me directly.
Sent from my iPhone
On Apr 12, 2017, at 11:33 PM, Richard Aubin <ve2dje@gmail.com> wrote:
I am not very hot in Brandmeister opération and configuration. .. My DMRlink can log on server 3108.on port 55001. The Last Heard windows shows every transmission I make on TG 3027. Every transmission from DMRlink triggers the ptt on my repeater on tg3027. But ..... No audio except a low level hish .... Is there something more that needs to be done on the server.????? I asking because I don't have a clue. I contacter Ve2vb Who is looking after BM 3021 for info abt their SmartPtt port. Waiting for his answer.... . Thanks for your help.....
Richard
Le 12 avr. 2017 6:14 PM, "Corey Dean" <n3fe@repeater.net> a écrit :
Have you been setup on the server for smart Ptt?
Corey n3fe
Sent from my iPhone
On Apr 12, 2017, at 5:35 PM, <ve2dje@gmail.com> <ve2dje@gmail.com> wrote:
Hi to everyone .
My DMR Gateway software suite is installed and all the testing in the procedure are OK..
I am connecting to Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my DMRlink on the Last Heard window as a Smart PTT Bridge
My DMRGAteway windows shows the connection to 127.0.0.1 port 31000 and to my
AST USRP 34001
When I do PTT and test audio from Iaxrpt connected to my node .
The RED and Green leds on th Thumbsb are flashing. LH list on the server is updated .
My DMRGatewy windows shows “Connected ( PTT asserted)” and “Disconnected ( PTT off)” when released
My ambe_audio windows shows `” INFO Transmit from gateway to TG3027:” then “INFO Transmit complete “ on PTT release
My test MMDVM repeater opened on TG 3027 receives a PTT from network.
BUT No audio ( only faint high frequency buzz )
No activity on Hoseline even if Last Heard is being updated.....
Any hints as how to test the ThumbDV output ???
Have been experimenting with the outputAudioDevice in DMRGateway.ini without success.....
Deffective ThumbDV ?????? . How can I make shure ????
Also I am hearing some audio out on AST node that is not coming from TG3027 ??????
My entry in ambe_audio.cfg is TGfilter = 3027,4327
Loaded the system twice from scratch and ..... Same.....
Thanks for any advice
Richard VE2DJE
Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> pour Windows 10
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
participants (5)
-
Corey Dean -
Mike Zingman -
Richard Aubin -
Steve Zingman -
ve2dje＠gmail.com