That did the trick! Thanks, David! Once I read the logic behind your argument, it made perfect sense, and the process went just as you described. N5ZUA On 5/21/2016 6:46 PM, David McGough wrote:
Steve,
Both usbradio and simpleusb are simultaneously competing for the available URI's...So, you have to train both drivers as to which URI to use.
The procedure is straight-forward. This is an example for a 2 node system:
1) Fully setup the usbradio.conf and simpleusb.conf config files, each with [usb] and [usb1] stanzas.
2) Modify the rpt.conf file to use usbradio for both nodes. Stanzas like:
rpt.conf:
[1998] rxchannel=Radio/usb (lots of other config)
[1999] rxchannel=Radio/usb1 (lots of other config)
3) Start Asterisk with "asterisk -vvvvgc" and save the usbradio_tune_xxxx.conf files:
*CLI> radio active usb Active (command) USB Radio device set to [usb] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb.conf *CLI> radio active usb1 Active (command) USB Radio device set to [usb1] *CLI> radio tune save Saved radio tuning settings to usbradio_tune_usb1.conf *CLI> stop now
4) Modify the rpt.conf setup for simpleusb:
rpt.conf (test nodes 1998, 1999):
[1998] rxchannel=SimpleUSB/usb (lots of other config)
[1999] rxchannel=SimpleUSB/usb1 (lots of other config)
5) Start Asterisk with "asterisk -vvvvgc" and save the simpleusb_tune_xxxx.conf files:
*CLI> *CLI> susb active usb *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb.conf *CLI> susb active usb1 *CLI> susb tune save Saved radio tuning settings to simpleusb_tune_usb1.conf *CLI> stop now
6) FINALLY--You're ready! ...Change the rpt.conf to a mix/match of usbradio and/or simpleusb:
rpt.conf (test nodes 1998, 1999):
[1998] rxchannel=SimpleUSB/usb ;rxchannel=Radio/usb (lots of other config)
(lots of other config)
[1999] ;rxchannel=SimpleUSB/usb1 rxchannel=Radio/usb1 (lots of other config)
7) Start Asterisk and do further setup.
73, David KB4FXC
On Sat, 21 May 2016, Steve Agee wrote:
Yes, and already "been there, done that" but the light on the second URIx stays solid.
N5ZUA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.