From what I've read...I think the codes you are trying to pass must be different than the starting character (i.e. *), since once Allstar sees a sequence it will mute everything past that. Tony On 01/24/2011 11:34 AM, VE3GIH Gordon Hewit wrote:
KE2N Ken suggested using the propagate_dtmf command in the rpt.conf file, as a way to propagate DTMF signals to other nodes. I need this capacity to allow our members access to the local phone patch. However with all nodes set to duplex=2 (full duplex) and propagate_dtmf=yes, I'm still not getting DTMF on the other local repeaters. The asterisk console sees the DTMF, but Asterisk isn't passing the digits onwards. Does anyone have a suggestion about what else I can try? VE3GIH Gord ______________________________________________ Date: Sat, 22 Jan 2011 09:42:49 -0500 (EST) From: Ken <ke2n@cs.com <mailto:ke2n@cs.com>> To: n3fe@repeater.net <mailto:n3fe@repeater.net>, telesistant@hotmail.com <mailto:telesistant@hotmail.com>, app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] DTMF Allow
Cory
I think there is a setting for this
propagate_dtmf= see http://209.159.155.200/drupal/node/134 <snipped> GL Ken KE2N
Gordon Hewit 289-800-1473 (home)
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users