It would appear the telemetry= is not implemented in the code. So there can be only one [telemetry] stanza. -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Sione Ragle Sent: Thursday, May 24, 2012 11:45 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] courtesy tone issue when linked I am struggling trying to figure this out. I have 2 repeaters on the same box, and each one of the have a unique courtesy tone. But when I link them, they loose that courtesy tone and start using remotetx which makes it so both repeaters have the same CT. So I went in to the rpt.conf file and under the nodes I change "telemetry=telemetry1" for node 1 and "telemetry=telemetry2" for node 2. Then under "[telemetry1]" I define a diffrent remotetx ct. but that did not work. It seems that the line "telemetry=telemetry1" does not work. Thanks --Sione _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users